|
|
|
|
| Author |
Message |
Guest
|
 Posted: Tue May 29, 2007 9:37 pm Post subject: a7v333 upgrade to 2GB DDR333 pc2700 |
 |
|
Ciao,
I bought 2GB (1GB x 2) DDR 333MHz, PC2700, 2.5V, Non-Parity, Non-ECC,
184-pin for my mobo a7v333, I tried to install them without success.
Somebody can help me?
This is my system configuration:
Motherboard ASUS a7v333
BIOS 1018 beta 4 (I tried with bios 1017)
chipset via kt333
AMD Athlon XP 2000+ (1666Mhz)
Video Card ABIT Siluro GF4 MX
I used jumpfree and no-jumpfree mobo setting. I tried many bios config
but when I power-on the PC, the screen appears black.
Please contact me if you need more information, I need to use these
2gb.
thank you! |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
RobV
Guest
|
| Posted: Tue May 29, 2007 9:52 pm Post subject: Re: a7v333 upgrade to 2GB DDR333 pc2700 |
|
|
phantomduck@gmail.com wrote:
| Quote: | Ciao,
I bought 2GB (1GB x 2) DDR 333MHz, PC2700, 2.5V, Non-Parity, Non-ECC,
184-pin for my mobo a7v333, I tried to install them without success.
Somebody can help me?
This is my system configuration:
Motherboard ASUS a7v333
BIOS 1018 beta 4 (I tried with bios 1017)
chipset via kt333
AMD Athlon XP 2000+ (1666Mhz)
Video Card ABIT Siluro GF4 MX
I used jumpfree and no-jumpfree mobo setting. I tried many bios config
but when I power-on the PC, the screen appears black.
Please contact me if you need more information, I need to use these
2gb.
thank you!
|
Try with just one stick plugged in. If that works, try the other one by
itself as well. If they work individually, raise the memory voltage in
the BIOS. In the spec, 2.5V is needed. Make sure you have that, or a
bit more (2.6,2.7). |
|
| Back to top |
|
|
Walt
Guest
|
| Posted: Tue May 29, 2007 10:34 pm Post subject: Re: a7v333 upgrade to 2GB DDR333 pc2700 |
|
|
On 29 May 2007 09:37:27 -0700, phantomduck@gmail.com wrote:
| Quote: | Ciao,
I bought 2GB (1GB x 2) DDR 333MHz, PC2700, 2.5V, Non-Parity, Non-ECC,
184-pin for my mobo a7v333, I tried to install them without success.
Somebody can help me?
This is my system configuration:
Motherboard ASUS a7v333
BIOS 1018 beta 4 (I tried with bios 1017)
chipset via kt333
AMD Athlon XP 2000+ (1666Mhz)
Video Card ABIT Siluro GF4 MX
I used jumpfree and no-jumpfree mobo setting. I tried many bios config
but when I power-on the PC, the screen appears black.
Please contact me if you need more information, I need to use these
2gb.
thank you!
|
http://www.crucial.com/store/listparts.aspx?model=A7V333
lots of info here for your board
The last time i had this problem it was a bad stick |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups