Posted: Sat May 26, 2007 10:55 am Post subject: P5N32E SLI : Troubles in dual channel mode
Hello
Here is my hardware :
E6600 + P5N32E SLI (BIOS 1101) + 2xDDR2 1Gb CL4 Corsair (2.1v)
Video : 8800 GTX
Vista 32 bits (frequently windows updated, drivers nVidia updated)
No overclocking.
I have frequent Blue Screens or hard reboots when i play 3D games (FSX and
rFactor).
And when i try to use only one DRR2 (no dual channel mode), it works fine.
So i think my troubles might come from the dual channel mode...
What can i do?
Modify voltage? (i use default values expected for DDR2 overloaded at 2.1
volts).
My Northbidge voltage seems too low : 1.34 volts (measured by Probe).
Posted: Mon May 28, 2007 9:55 am Post subject: Re: P5N32E SLI : Troubles in dual channel mode
Quote:
Did you run memtest86 with both sticks in? Do you have any errors?
MemTest86 no error during 48 hours in dual mode
Quote:
I had a set of OCZ which worked 100% fine by themselfs, but in dual
channel mode I ran into issues. I had everything manually set (voltage,
timings, etc) and nothing helped. I ended up buying a set of kingston and
it worked fine in dual channel mode - so I sent the OCZ back.
May be it is what i should do with my Corsair... Are you sure we can sent
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups