HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
comp doesnt see hd/cd

 
Post new topic   Reply to topic    Index -> DIY
Author Message
Don Ward
Guest
PostPosted: Thu Dec 25, 2003 12:20 pm    Post subject: comp doesnt see hd/cd Reply with quote
I have a spare comp (A) with a pent2 processor that goes thru post just
fine.. it currently has no hd/cd or oper syst.
my comp (B) died and I transfered the hard drive and cd into comp (A)...
but comp (a) doest see the hard drive or cd...
I went to bios and it shows the floppy A drive that is all
Where do i start looking
don

--
---
don ward <dward7@earthlink.net>
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Gary Tait
Guest
PostPosted: Fri Dec 26, 2003 9:05 pm    Post subject: Re: comp doesnt see hd/cd Reply with quote
On Thu, 25 Dec 2003 06:20:39 GMT, dward7@earthlink.net (Don Ward)
wrote:

Quote:
I have a spare comp (A) with a pent2 processor that goes thru post just
fine.. it currently has no hd/cd or oper syst.
my comp (B) died and I transfered the hard drive and cd into comp (A)...
but comp (a) doest see the hard drive or cd...
I went to bios and it shows the floppy A drive that is all
Where do i start looking
don

Check to se IDE is enabled, then to see the drives are set to auto, if
not to the specs that were set up in the previous PC.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> DIY All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects