HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
How to set gamma without the Catalyst Control Center

 
Post new topic   Reply to topic    Index -> ATI videocards
Author Message
Guest
PostPosted: Sun Apr 29, 2007 11:44 pm    Post subject: How to set gamma without the Catalyst Control Center Reply with quote
Hello,

I have an ATI Radeon 9550 for which I've installed the driver 6.2 from
http://ati.amd.com/support/drivers/fr/2k/radeonx-2k.html, without the
Catalyst Control Center that I don't wants (several crash observed on
others config and need of .NET that I don't wish to install just for
this CCC).

All sound right unless one thing : how to tune the gamma without the CCC
? The display's advanced properties don't show anything about this.

Awaiting your advice
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
First of One
Guest
PostPosted: Mon Apr 30, 2007 6:43 am    Post subject: Re: How to set gamma without the Catalyst Control Center Reply with quote
Two options:

1. Use ATi Tray Tools, which offers all the capabilities of CCC (except
Crossfire enable/disable). I find ATT less temperamental than Powerstrip,
because ATT was written specifically for ATi cards.

2. The FireMV driver is still offered with the old ATi Control Panel as an
option. Download the driver here:
http://ati.amd.com/support/drivers/xp/firemv-xp.html and run the executable.
It will first extract the driver files to a directory before starting with
the actual installation. Simply cancel after the extraction, then navigate
over to the directory, go into the CPanel folder and run Setup from there.

--
"War is the continuation of politics by other means.
It can therefore be said that politics is war without
bloodshed while war is politics with bloodshed."

<eremax@worldonline.com> wrote in message
news:MPG.209f060f400c843198991a@news.tiscali.fr...
Quote:
Hello,

I have an ATI Radeon 9550 for which I've installed the driver 6.2 from
http://ati.amd.com/support/drivers/fr/2k/radeonx-2k.html, without the
Catalyst Control Center that I don't wants (several crash observed on
others config and need of .NET that I don't wish to install just for
this CCC).

All sound right unless one thing : how to tune the gamma without the CCC
? The display's advanced properties don't show anything about this.

Awaiting your advice
Back to top
Bill
Guest
PostPosted: Mon Apr 30, 2007 7:15 am    Post subject: Re: How to set gamma without the Catalyst Control Center Reply with quote
In article <MPG.209f060f400c843198991a@news.tiscali.fr>,
eremax@worldonline.com says...
Quote:
Hello,

I have an ATI Radeon 9550 for which I've installed the driver 6.2 from
http://ati.amd.com/support/drivers/fr/2k/radeonx-2k.html, without the
Catalyst Control Center that I don't wants (several crash observed on
others config and need of .NET that I don't wish to install just for
this CCC).

All sound right unless one thing : how to tune the gamma without the CCC
? The display's advanced properties don't show anything about this.

Awaiting your advice


http://files.filefront.com/Gamma+Adjuster/;6896710;/fileinfo.html

Bill
--
Gmail and Google Groups. This century's answer to AOL and WebTV.
Back to top
Guest
PostPosted: Wed May 02, 2007 4:07 pm    Post subject: Re: How to set gamma without the Catalyst Control Center Reply with quote
In article <MPG.209f060f400c843198991a@news.tiscali.fr>,
eremax@worldonline.com says...

OK, thanks to all of you : I've adopted GammaAdjuster which has the
advantage to focus on the Gamma subject and work with all the cards.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> ATI videocards All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects