Posted: Sat Apr 28, 2007 12:27 am Post subject: kt400 bios update gone wrong
Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100) DDR
which shows compatibility with 266/333/400 MHz bus speeds. Computer would
not load windows so went into Bios and noticed that I could not get over 200
bus speed. Thought it was due to outdated bios so I downloaded KT4L2AA9.bin
supposedly for my motherboard from SOYO. Started up with minimum boot in dos
and ranAWD824G.exe which asked for the above .bin file and saved old bios
with ...old.bin name. Then it saved old bios and came up with error message
because I typed in the wrong letter in the name so I started over and now it
just hangs up with the message to Please Wait! I waited and waited with no
results. Restarted computer and tried again with the same result. Anyone
know why I should do to get this fixed?
Posted: Mon Apr 30, 2007 6:26 am Post subject: Re: kt400 bios update gone wrong
daytrader wrote:
Quote:
Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100) DDR
which shows compatibility with 266/333/400 MHz bus speeds. Computer would
not load windows so went into Bios and noticed that I could not get over 200
bus speed. Thought it was due to outdated bios so I downloaded KT4L2AA9.bin
supposedly for my motherboard from SOYO. Started up with minimum boot in dos
and ranAWD824G.exe which asked for the above .bin file and saved old bios
with ...old.bin name. Then it saved old bios and came up with error message
because I typed in the wrong letter in the name so I started over and now it
just hangs up with the message to Please Wait! I waited and waited with no
results. Restarted computer and tried again with the same result. Anyone
know why I should do to get this fixed?
Posted: Tue May 01, 2007 9:16 am Post subject: Re: kt400 bios update gone wrong
new bios chip?
"lkboop" <lkboop@ca.rr.com> wrote in message
news:463545b4$0$4693$4c368faf@roadrunner.com...
Quote:
daytrader wrote:
Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100)
DDR which shows compatibility with 266/333/400 MHz bus speeds. Computer
would not load windows so went into Bios and noticed that I could not get
over 200 bus speed. Thought it was due to outdated bios so I downloaded
KT4L2AA9.bin supposedly for my motherboard from SOYO. Started up with
minimum boot in dos and ranAWD824G.exe which asked for the above .bin
file and saved old bios with ...old.bin name. Then it saved old bios and
came up with error message because I typed in the wrong letter in the
name so I started over and now it just hangs up with the message to
Please Wait! I waited and waited with no results. Restarted computer and
tried again with the same result. Anyone know why I should do to get this
fixed?
Posted: Fri May 04, 2007 3:31 pm Post subject: Re: kt400 bios update gone wrong
On Fri, 27 Apr 2007 23:31:45 GMT, "daytrader"
<daytraderX@socal.rr.com> wrote:
Quote:
Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100) DDR
which shows compatibility with 266/333/400 MHz bus speeds. Computer would
not load windows so went into Bios and noticed that I could not get over 200
bus speed. Thought it was due to outdated bios so I downloaded KT4L2AA9.bin
supposedly for my motherboard from SOYO. Started up with minimum boot in dos
and ranAWD824G.exe which asked for the above .bin file and saved old bios
with ...old.bin name. Then it saved old bios and came up with error message
because I typed in the wrong letter in the name so I started over and now it
just hangs up with the message to Please Wait! I waited and waited with no
results. Restarted computer and tried again with the same result. Anyone
know why I should do to get this fixed?
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups