HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
Who's running a Wifi IP cam and NAS-storage.

 
Post new topic   Reply to topic    Index -> Webcams
Author Message
Clemens.van.Os@gmail.com
Guest





PostPosted: Sun Apr 08, 2007 11:09 am    Post subject: Who's running a Wifi IP cam and NAS-storage. Reply with quote

I am certain that it works with same cams. It is mentioned in the
manual. Has anybody running a cam in this situation. Gif me some tips
if you can ???
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Karl-Olav Nyberg
Guest





PostPosted: Wed Apr 11, 2007 12:12 am    Post subject: Re: Who's running a Wifi IP cam and NAS-storage. Reply with quote

<Clemens.van.Os@gmail.com> skrev i melding
news:1176012565.467184.162010@q75g2000hsh.googlegroups.com...
Quote:
I am certain that it works with same cams. It is mentioned in the
manual. Has anybody running a cam in this situation. Gif me some tips
if you can ???


Hi.
I have a DLink DCS-950G wit the latest firmware (1.07). I have tried it with
a standalone network harddisk.
I set up an account on the harddisk for the camera. Then I logged in to the
camera and did this:
SETUP - TOOLS - RECORDING.

Her I set the camera to stream to the harddisk. Used the same account name
and password as I had on the harddisk and gave the path to the account. It
worked.

Hope this helps.

konyberg
Back to top
Clemens.van.Os@gmail.com
Guest





PostPosted: Sat Apr 14, 2007 12:11 pm    Post subject: Re: Who's running a Wifi IP cam and NAS-storage. Reply with quote

On 10 apr, 21:12, "Karl-Olav Nyberg" <konyb...@online.no> wrote:
Quote:
Clemens.van...@gmail.com> skrev i meldingnews:1176012565.467184.162010@q75g2000hsh.googlegroups.com...

I am certain that it works with same cams. It is mentioned in the
manual. Has anybody running a cam in this situation. Gif me some tips
if you can ???

Hi.
I have a DLink DCS-950G wit the latest firmware (1.07). I have tried it with
a standalone network harddisk.
I set up an account on the harddisk for the camera. Then I logged in to the
camera and did this:
SETUP - TOOLS - RECORDING.

Her I set the camera to stream to the harddisk. Used the same account name
and password as I had on the harddisk and gave the path to the account. It
worked.

Hope this helps.

konyberg

Thanks a lot. Are you satisfied with this or you see maybe also
problems with the setting I mentioned.

Clemens
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Webcams All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects