HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
SS30G2 and Celeron D

 
Post new topic   Reply to topic    Index -> Shuttle
Author Message
Donald
Guest
PostPosted: Sat Mar 17, 2007 7:21 pm    Post subject: SS30G2 and Celeron D Reply with quote
I just received a Shuttle SS30G2 and a Celeron D from Newegg.

I plugged in the cpu and a Corsair 512M DDR2 memory module.

Plugged in the power cord and VGA monitor on the back.

Push the power button, fans come on, LEDs come on, no video to the monitor.

I do not see any jumpers on the mother board, so I do not think its miss
configured.

Any suggestions about what I may have done wrong.

I contacted Newegg via email, but I will not hear from then until Monday.

I did notice that the cpu did not get warm when I checked it.

Thanks for any feedback.

donald
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Stephen
Guest
PostPosted: Sun Mar 18, 2007 9:17 pm    Post subject: Re: SS30G2 and Celeron D Reply with quote
On Sat, 17 Mar 2007 07:21:19 -0700, Donald <Donald@dontdoithere.com>
had a flock of green cheek conures squawk out:

Quote:
I just received a Shuttle SS30G2 and a Celeron D from Newegg.

I plugged in the cpu and a Corsair 512M DDR2 memory module.

Plugged in the power cord and VGA monitor on the back.

Push the power button, fans come on, LEDs come on, no video to the monitor.

I do not see any jumpers on the mother board, so I do not think its miss
configured.

Any suggestions about what I may have done wrong.

I contacted Newegg via email, but I will not hear from then until Monday.

I did notice that the cpu did not get warm when I checked it.

Thanks for any feedback.

donald

CPU fan connected to the correct header?
CPU heatsink installed correctly?
All motherboard power cables connected?
Clear CMOS jumper on the correct pins?

Stephen
--
Back to top
Donald
Guest
PostPosted: Mon Mar 19, 2007 4:22 am    Post subject: Re: SS30G2 and Celeron D Reply with quote
Stephen wrote:
Quote:
On Sat, 17 Mar 2007 07:21:19 -0700, Donald <Donald@dontdoithere.com
had a flock of green cheek conures squawk out:


I just received a Shuttle SS30G2 and a Celeron D from Newegg.

I plugged in the cpu and a Corsair 512M DDR2 memory module.

Plugged in the power cord and VGA monitor on the back.

Push the power button, fans come on, LEDs come on, no video to the monitor.

I do not see any jumpers on the mother board, so I do not think its miss
configured.

Any suggestions about what I may have done wrong.

I contacted Newegg via email, but I will not hear from then until Monday.

I did notice that the cpu did not get warm when I checked it.

Thanks for any feedback.

donald


CPU fan connected to the correct header?
CPU heatsink installed correctly?
All motherboard power cables connected?
Clear CMOS jumper on the correct pins?

Stephen

Thanks, all these items were checked and double-checked.

On one of the forums I found, it seems that the SS30G2 is known for
being finicky.

http://www.sudhian.com/index.php?/forums/

I'm going to send it back with the cpu I bought.

Maybe buying the pre-built version is the best for these new beasts.

donald
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Shuttle All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects