Enterprise Guest
|
Posted: Mon Mar 12, 2007 11:10 pm Post subject: P6N Diamond w/ X-Fi Xtreme |
|
|
CPU
• Supports Socket 775 for Intel Core2 Quad, Core2 Extreme, Core2 Duo,
Pentium 4 (Prescott, P4EE), Pentium D, Pentium XE/Celeron D processors in
LGA 775 package
• Supports FSB 533/800/1066/1333* MHz (FSB 1333 requires FSB 1333 CPU and
manual FSB adjustment in the BIOS)
• Supoprts Intel 05B/05A and 04B/04A processors
• Supoprts EIST techonology
• Supports Intel Hyper-Threading (HT) Technology
• Supports Intel Dual Core Technology to 1333MHz and up
Chipset
NVIDIA® nForce 680i SLI (C55) Chipset
• Supports FSB 800MHz, 1066MHz & 1333MHz* (FSB 1333 requires FSB 1333 CPU
and manual FSB adjustment in the BIOS)
• Support Dual channel DDR2 533/667/800 memory interface up to 8GB
• Support Dual PCI Express 16X interface with either 1x16 + 1x8 or 2x8
operation.
NVIDIA® nForce 430i (MCP55) Chipset
• Integrated Hi-Speed USB 2.0 controller, 480Mb/sec, 10 ports
• 5 Serial ATAII ports w/ transfer rate up to 3Gb/s and support RAID (0,1,
0+1 & 5)
• 1 channel Ultra ATA 133 bus Master IDE controller up to 2 IDE drives
• Support Dual PCI Express 16X interface with 1x16, or 2x8 operation
• PCI Master v 2.3, I/O ACPI 2.0 Compliant
FSB
• Support FSB 800MHz, 1066MHz & 1333MHz* (FSB 1333 requires FSB 1333 CPU
and manual FSB adjustment in the BIOS)
Main Memory
• Supports dual channel DDR2 533/667/800 and up, using four 240-pin DDR2
DIMMs
• Supports the memory size up to 8GB
• Supports 1.8v DDR2 SDRAM DIMM
Due to the High Performance Memory design, motherboards or system
configurations may or may not operate smoothly at the JEDEC (Joint Electron
Device Engineering Council) standard settings (BIOS Default on the
motherboard) such as DDR2 voltage, memory speeds and memory timing. Please
confirm and adjust your memory setting in the BIOS accordingly for better
system stability.
Example: Kingston HyperX DDR2-800 PC6400 operates at 2.0V, 4-4-4-12.
For more information about specification of high performance memory modules,
please check with your Memory Manufactures for more details.
For the best performance and commitment of convenience, please visit MSI
approved memory module vendor list (MSI AVL), which provides the easiest,
up-to-date memory configurations
Slots
• Four PCI Express X16 slots (supports PCI Express Bus specification
v1.0a compliant) (The 4 PCI Express interface will operate at either
X8+X8+X16+X8 or 16X+16X+8X mode)
• One PCI Express X1 slot
• Three 32-bit Master PCI Bus slots (Support 3.3V/5V PCI bus interface)
On-Board IDE / SATA
• Single IDE controllers on the NVIDIA nForce 430i chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes
- Can connect up to 2 IDE devices
• NV RAID supports 5 SATA II ports (SATA1-5). Transfer rate is up to 300MB/s
• NV RAID
- Supports up to 5 SATA
- RAID 0 or 1, 0+1, 5, JBOD is supported
- RAID function work w/ SATAII H/D
External eSATA RAID
• 2 SATAII port by Sil3531 (1 on back panel, 1 on board)
• Supports RAID 0 or 1
Audio
Creative Sound Blaster X-Fi Xtreme HD Audio
• 24 bit/ 96kHz 7.1 playback
• > 108db signal to noise ratio
• 24bit / 96kHz recording
• X-Fi Crystalizer, CMSS-3D Virtual, CMSS-3D Headphone technology
• Up to 7.1 CH Surround Sound, Dolby Digital ready
LAN
• Supports 10/100/1000 Fast Ethernet by NVIDIA
IEEE 1394
VIA 6308P chipset
• Supports up to 2 x 1394 ports
• Transfer rate is up to 400Mbps
BIOS
• The mainboard BIOS provides "Plug & Play" BIOS which detects the
peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which
records your mainboard specifications.
• Supports boot from LAN, USB Device 1.1 & 2.0 and SATA HDD
On-Board Peripherals
• 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes
• 1 audio jack (5-in-1), coaxial/optical SPDIF out
• 10 USB 2.0 ports (Rear x 4 / Front x 6)
• 2 RJ45 LAN jack
• 1 D-Bracket 2 pinheader
• 2 IEEE 1394a connectors (Rear x 1 / Front x 1)
• 1 CD-in pinheader
• 1 eSATA port
Dimensions
11.96 in. (L) x 9.61 in. (W) ATX Form Factor
Mounting
9 mounting holes
Any Thoughts? |
|