HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
AB9 Pro Boot Issues

 
Post new topic   Reply to topic    Index -> ABIT
Author Message
Guest






PostPosted: Mon Feb 19, 2007 11:49 am    Post subject: AB9 Pro Boot Issues Reply with quote

Alright here's what I am trying to do
I have 4x 750GB drives in SATA1-4 (RAID5) and 2x500GB in SATA8-9
(RAID1)
I am trying to use the RAID1 for system and RAID5 for data

When I build the operating system it won't let me continue unless I
create a partition in the RAID5, even though I have set the boot order
to the RAID1 first and RAID5 second. So after installing the OS the
boot info is on the RAID5 drive.

The odd thing is that after installing it won't boot at all! ONLY if I
leave the OS CD in the drive, it will say 'press any key to boot from
CD' which I don't of course and then it will load the OS successfully.
BUT if I don't have the CD in the drive then it fails to boot. (This
is obviously because the boot info is on RAID5 and that RAID1 has
nothing)

Somewhere along the line during the OS install it still thinks that
the RAID5 is still the first boot drive which it's not supposed to be!

Any ideas?
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Barney Rubble
Guest





PostPosted: Thu Feb 22, 2007 12:34 am    Post subject: Re: AB9 Pro Boot Issues Reply with quote

That's a lot of ***....

<ben.tan@bendigoit.com.au> wrote in message
news:1171864178.127016.324220@p10g2000cwp.googlegroups.com...
Quote:
Alright here's what I am trying to do
I have 4x 750GB drives in SATA1-4 (RAID5) and 2x500GB in SATA8-9
(RAID1)
I am trying to use the RAID1 for system and RAID5 for data

When I build the operating system it won't let me continue unless I
create a partition in the RAID5, even though I have set the boot order
to the RAID1 first and RAID5 second. So after installing the OS the
boot info is on the RAID5 drive.

The odd thing is that after installing it won't boot at all! ONLY if I
leave the OS CD in the drive, it will say 'press any key to boot from
CD' which I don't of course and then it will load the OS successfully.
BUT if I don't have the CD in the drive then it fails to boot. (This
is obviously because the boot info is on RAID5 and that RAID1 has
nothing)

Somewhere along the line during the OS install it still thinks that
the RAID5 is still the first boot drive which it's not supposed to be!

Any ideas?
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> ABIT All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects