|
|
| Author |
Message |
William C. Smith
Guest
|
 Posted: Sun Jan 14, 2007 4:31 am Post subject: External Ultra SCSI Drives |
 |
|
How does one connect an external Ultra SCSI drive? The only cables I find
connect the case external receptical to the SCSI card. I wish to connect to
internal drives and then to the external receptical.
--
Bill |
|
| Back to top |
|
 |
|
|
John L Rice
Guest
|
| Posted: Sun Jan 14, 2007 6:16 am Post subject: Re: External Ultra SCSI Drives |
|
|
"William C. Smith" <wcsmithx*xieee.org> wrote in message
news:Xns98B79DFA130A4wcsmithieeeorg@216.196.97.136...
| Quote: | How does one connect an external Ultra SCSI drive? The only cables I find
connect the case external receptical to the SCSI card. I wish to connect
to
internal drives and then to the external receptical.
--
Bill
|
A lot depends on what you already have and want to do. A lot of SCSI
controllers have an external jack but a lot don't. Since you are asking I'll
assume yours doesn't. ;-) In that case you can probably use an internal
cable to external connector on a back plate type of thing like this :
http://www.nanosys1.com/sc-cbl-i68m-e68f-bp.html
or like this :
http://cgi.ebay.com/Ultra-320-U320-68-Pin-Internal-to-External-SCSI-3-Cable_W0QQitemZ120030086804
Best of luck!
--
John L Rice
www.DeliriumFix.com |
|
| Back to top |
|
|
William C. Smith
Guest
|
| Posted: Sun Jan 14, 2007 10:00 pm Post subject: Re: External Ultra SCSI Drives |
|
|
"John L Rice" <Drummer@ImJohn.com> wrote in
news:12qitfvjo904icf@corp.supernews.com:
| Quote: | "William C. Smith" <wcsmithx*xieee.org> wrote in message
news:Xns98B79DFA130A4wcsmithieeeorg@216.196.97.136...
How does one connect an external Ultra SCSI drive? The only cables I
find connect the case external receptical to the SCSI card. I wish to
connect to
internal drives and then to the external receptical.
--
Bill
A lot depends on what you already have and want to do. A lot of SCSI
controllers have an external jack but a lot don't. Since you are
asking I'll assume yours doesn't. ;-) In that case you can probably
use an internal cable to external connector on a back plate type of
thing like this : http://www.nanosys1.com/sc-cbl-i68m-e68f-bp.html
or like this :
http://cgi.ebay.com/Ultra-320-U320-68-Pin-Internal-to-External-SCSI-3-C
able_W0QQitemZ120030086804
Best of luck!
|
John,
I will need some luck. I want to have a chain of SCSI drives. Three will
be in the case and one will be external. The cable that I want will have
three connectors for the internal drives, no termination, and an external
connector. The termination will be after the external drive.
My SCSI controller will be an onboard adaptec, and the external drive
will be a DAT drive.
--
Bill |
|
| Back to top |
|
|
|
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups