|
|
|
|
| Author |
Message |
Daniel Masse
Guest
|
 Posted: Thu Jan 11, 2007 11:10 pm Post subject: Nikon 9000 does not detect tray |
 |
|
Hello !
I am having some problems with my new scanner... It was damaged in
transport, and I had to send it back to Nikon.
I got it back today, but I could not start it up...
When I start Nikon Scan, I get the message "The scanner has reported a
hardware error. Please reset the scanner by switching on and off. If this
does not work, please contact your local Nikon Service or Support office".
When I switch it on and off, I get "Nikon Scan was unable to find any active
device"...
Yet, XP shows the scanner as installed and operating correctly.
When I try to insert the tray, nothing happens : the tray does not feed
automatically in.
Of course, the repair to the transport damage is guaranteed by Nikon, and
they will fix the new problem with no charge (hopefully !). I contacted the
Technical Service, but if I could find a way to get it working without
sending it back, that would be better...
Thanks !
Dan |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
tomm42
Guest
|
| Posted: Tue Jan 16, 2007 12:15 am Post subject: Re: Nikon 9000 does not detect tray |
|
|
Daniel Masse wrote:
| Quote: | Hello !
I am having some problems with my new scanner... It was damaged in
transport, and I had to send it back to Nikon.
I got it back today, but I could not start it up...
When I start Nikon Scan, I get the message "The scanner has reported a
hardware error. Please reset the scanner by switching on and off. If this
does not work, please contact your local Nikon Service or Support office".
When I switch it on and off, I get "Nikon Scan was unable to find any active
device"...
Yet, XP shows the scanner as installed and operating correctly.
When I try to insert the tray, nothing happens : the tray does not feed
automatically in.
Of course, the repair to the transport damage is guaranteed by Nikon, and
they will fix the new problem with no charge (hopefully !). I contacted the
Technical Service, but if I could find a way to get it working without
sending it back, that would be better...
Thanks !
Dan
|
The only thing you can do is remove the Nikon software and reinstall
it, per directions on your install card. If that doen't work call tech
support they maybe able to help over the phone. If they can't complain
about having to ship something back they should have fixed the first
time. Sometimes works,but it probably have to go back to Nikon, could
have been damaged in transit again.
Tom |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups