|
|
|
|
| Author |
Message |
NapalmHeart
Guest
|
 Posted: Thu Dec 28, 2006 6:51 am Post subject: Recovery Allocation Size? |
 |
|
I'm replacing the hard drive in my Presario SR1011NX. Should I set the size
of the D drive at the same size as the D drive in the original hard drive or
should I make it as the same percentage size. I'm replacing a 40G with a
120G.
Thanks,
Ken |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
HH
Guest
|
| Posted: Thu Dec 28, 2006 1:59 pm Post subject: Re: Recovery Allocation Size? |
|
|
If you are trying to use the Recovery CD, not to be confused with the
QuickRestore CD(s), be advised it will NOT work on a blank hard drive. The
Recovery CD uses the compressed restore files on the D: System_sav
partition to restore the drive. No partition/files, no restore.
HH
"NapalmHeart" <olsonfam@iserv.net> wrote in message
news:12p657pl3eflac6@corp.supernews.com...
| Quote: | I'm replacing the hard drive in my Presario SR1011NX. Should I set the
size of the D drive at the same size as the D drive in the original hard
drive or should I make it as the same percentage size. I'm replacing a
40G with a 120G.
Thanks,
Ken
|
|
|
| Back to top |
|
|
NapalmHeart
Guest
|
| Posted: Fri Dec 29, 2006 1:51 am Post subject: Re: Recovery Allocation Size? |
|
|
"- Bobb -" <bobb@noemail.123> wrote in message
news:7NCdnTtWrL2m2wnYnZ2dnUVZ_r-onZ2d@comcast.com...
| Quote: |
"NapalmHeart" <olsonfam@iserv.net> wrote in message
news:12p657pl3eflac6@corp.supernews.com...
I'm replacing the hard drive in my Presario SR1011NX. Should I set the
size of the D drive at the same size as the D drive in the original hard
drive or should I make it as the same percentage size. I'm replacing a
40G with a 120G.
Thanks,
Ken
The model # means nothing to me - is it Win98 / XP ?
WHEN INSTALLING THE NEW DRIVE, leave the old drive hooked up as master for
a few minutes, hook up the new drive as slave and RUN the CD clone program
that came with the new drive. Select "copy drive" to create the new image
on your new drive. Nothing personal, but I'll just note: DO pay attention
to "copy from = 40 gb", 'copy to = 120gb' - you do not want to end up
with 2 blanks drives. That will save your factory D drive restore files to
the new drive.
If while doing that, you can choose the size, maybe make it a bit bigger
( to allow room for more backups), but generally in Compaq's, you use
the D drive only for backups/restore info so do not put your "everyday
stuff" there . If not Win98 or ME, and IS Win2000 or WinXP ( that has
NTFS ), the D drive would be in FAT32 - not NTFS. Leave it that way in
case XP gets toasted you can still restore your system.
If you do not NEED the disk space at all , I'd suggest keeping the
original in there but not hooked / plugged in. That way you will always
have the necessary info to recreate the factory image - even if the power
supply fries your new drive.
|
XP. Thanks for the good comments.
Ken |
|
| Back to top |
|
|
- Bobb -
Guest
|
| Posted: Fri Dec 29, 2006 1:51 am Post subject: Re: Recovery Allocation Size? |
|
|
"NapalmHeart" <olsonfam@iserv.net> wrote in message
news:12p657pl3eflac6@corp.supernews.com...
| Quote: | I'm replacing the hard drive in my Presario SR1011NX. Should I set
the size of the D drive at the same size as the D drive in the
original hard drive or should I make it as the same percentage size.
I'm replacing a 40G with a 120G.
Thanks,
Ken
The model # means nothing to me - is it Win98 / XP ? |
WHEN INSTALLING THE NEW DRIVE, leave the old drive hooked up as master
for a few minutes, hook up the new drive as slave and RUN the CD clone
program that came with the new drive. Select "copy drive" to create the
new image on your new drive. Nothing personal, but I'll just note: DO
pay attention to "copy from = 40 gb", 'copy to = 120gb' - you do not
want to end up with 2 blanks drives. That will save your factory D drive
restore files to the new drive.
If while doing that, you can choose the size, maybe make it a bit bigger
( to allow room for more backups), but generally in Compaq's, you use
the D drive only for backups/restore info so do not put your "everyday
stuff" there . If not Win98 or ME, and IS Win2000 or WinXP ( that has
NTFS ), the D drive would be in FAT32 - not NTFS. Leave it that way in
case XP gets toasted you can still restore your system.
If you do not NEED the disk space at all , I'd suggest keeping the
original in there but not hooked / plugged in. That way you will always
have the necessary info to recreate the factory image - even if the
power supply fries your new drive. |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups