Posted: Sun Nov 26, 2006 10:08 pm Post subject: Re: Can I replace on-board USB 1.1 slots by a separate USB 2
"Peter Meister" <pmeister2@lycos.com> wrote in message
news:4565f4c7$0$18838$9b4e6d93@newsspool4.arcor-online.net...
Quote:
Unfortunately my motherboard (ECS K7S5A rev5.0 resp. rev1.0) has only USB
slots of standard 1.1.
Is it possible to buy an additional PCI card with 2.0 USB slots and use them
instead ?
In order not to confuse Win2000/WinXP I assume that I have to disable the old
USB 1.1 slots.
How do I do this ? Is there a switch/option for them ?
How do I tell Win200/WinXP to use 2.0 drivers and USB 2.0 slots when new
external USB devices
are plugged into the new USB slots ?
Peter
Just order a card from Pricewatch or go to a computer store. It will be a PCI
card and should cost under $20 US.
It will come with an installation CD and is very simple to install.
You do not have to disable the old USB 1.1 because the new card will have its
own ports and you can still use the old ports if needed for a mouse, etc.
I have a K7S5a rev 3.1 and I dual boot Win98SE and Win2000Pro and my card has 4
USB 2 ports.
It is and Encore PCI Controller Card and it was around $10US.
You can search on the Internet and even get FireWire ports included with that
new card.
Some cost quite a bit, so look around.
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups