HowToFixComputers.com

Adam Smith · Guest

An older SOYO Build
O/S: Windows 2000 Professional
Main Board Model: SY-7VEM
BIOS: Original default, Can't get to the POST
Memory: 512 Mb Kingston
CPU: Celeron 700 MHz

Would not start, New Power supply etc [Tested OK! as well]. On pressing
and holding down start button for 4 - 5 sec, CPU cooling fan may,
intermittently lurch for a 1/2 turn. ??? Fan(s) test OK! independently.

How can I get a copy of the SOYO Disc w/ drivers, I can't locate mine.
Is there a download somewhere, an ISO etc., or available from the Company.

Davy · Last edited by Davy on Fri Nov 24, 2006 12:38 am; edited 1 time in total

Have a peep here in the ref. links in Computer Help desk, pretty sure you'll get them from Soyo which I think I included.

http://www.howtofixcomputers.com/bb/viewtopic.php?t=186983
http://www.howtofixcomputers.com/bb/viewtopic.php?t=186979

But fans should spin as soon as you power the unit up because this would have to happen before installing any driver.

You checked the fan and changed the PSU which seems logical, may be worth checking for any bulged or swollen electrolytic capacitors (caps for short), these usually have a domed top instead of being nice n' flat and you may see gunge leaking from them, this stuff can eat through the PCB laquer used to protect the copper tracks and then eat them away. Sometimes checking the actual mobo PSU (Power Supply Unit) connector for bad or burned soldered joints may help.

Would it be worth while checking the CPU.. could a electronic fault on the mobo.... but I could be wrong and stand to be corrected.

You should get bios POST beep with just the CPU, Graphic and RAM, all other drives inc. the HDD can be disconnected for bios boot, maybe re-inserting these and cleaning and applying new heat sink paste to the CPU may prove fruitful.

Davy

Louie · Guest

Adam Smith wrote:

Louie · Guest

Adam Smith wrote:

rlslaymaker · Guest

I have 35 of these SOYO SY7VEM boards in the school computer lab which I
have managed as a volunteer for the past 5 years.

You definitely have a capacitor problem with one or more of the 10v
1500uf electrolytic caps on the board. Because of this you have a
scrambled bios memory. If you replace the CMOS battery and clear the
BIOS with the white jumper, you will probably boot again.

Note: Your board will no longer be dependable unless you have the board
recapped.

PS: I accept donations of these boards for the school, regardless of
condition.

--
rlslaymaker
------------------------------------------------------------------------
rlslaymaker's Profile: http://www.futurehardware.in/member.php?userid=260
View this thread: http://www.futurehardware.in/showthread.php?t=553362

Future Hardware - http://www.futurehardware.in