|
|
|
|
| Author |
Message |
lxs
Guest
|
 Posted: Tue Sep 19, 2006 5:41 am Post subject: comp is making noise under graphics load |
 |
|
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you. |
|
| Back to top |
|
 |
|
|
CoCo
Guest
|
| Posted: Tue Sep 19, 2006 1:44 pm Post subject: Re: comp is making noise under graphics load |
|
|
lxs skrev:
| Quote: | Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
|
hi
cpu/gf use much more power under load and then something like parts in psu or cpu power
converters (transistors/coils) makes the sound, can also be ure soundcard that picks up the
electric noise, u didn't tell if it were in speakers or not.
| Quote: | What could be the problem?
|
maybe, but likely not. but u can check the mb for the cause by putting u're finger around to
locate parts that "sounds" (coils & transistors), little warning here, hot parts!!!
if u dare and have found the noisemaker maybe a plastic stiper or shrinkhose can fix it!
;-) |
|
| Back to top |
|
|
Dylan C
Guest
|
| Posted: Tue Sep 19, 2006 7:01 pm Post subject: Re: comp is making noise under graphics load |
|
|
lxs wrote:
| Quote: | Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a rattle |
or buzz, you should be able to pinpoint the source by removing the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C |
|
| Back to top |
|
|
Zephyr
Guest
|
| Posted: Tue Sep 19, 2006 8:13 pm Post subject: Re: comp is making noise under graphics load |
|
|
I'm think interrupt. His sound card interrupt is the same as the hard drive
or something?
--
Zyp
"Dylan C" <nospam@nospam.com> wrote in message
news:12gvu1i3d8hred3@corp.supernews.com...
| Quote: | lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a rattle
or buzz, you should be able to pinpoint the source by removing the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C |
|
|
| Back to top |
|
|
lxs
Guest
|
| Posted: Tue Sep 19, 2006 10:27 pm Post subject: Re: comp is making noise under graphics load |
|
|
Dylan C wrote:
| Quote: | lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a rattle
or buzz, you should be able to pinpoint the source by removing the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C
|
Thanks for the reply.
I don't have any speakers.
I've tried pin pointing to the location of the sound the noise is
coming from the area around cpu, its deminitely not PWS.
In general the noise sounds like something is being calculated but its
ubnormal.
Any help would be appresiated.
Thank you. |
|
| Back to top |
|
|
|
|
Dylan C
Guest
|
| Posted: Tue Sep 19, 2006 11:57 pm Post subject: Re: comp is making noise under graphics load |
|
|
lxs wrote:
| Quote: | Dylan C wrote:
lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a rattle
or buzz, you should be able to pinpoint the source by removing the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C
Thanks for the reply.
I don't have any speakers.
I've tried pin pointing to the location of the sound the noise is
coming from the area around cpu, its deminitely not PWS.
In general the noise sounds like something is being calculated but its
ubnormal.
Any help would be appresiated.
Thank you.
Well, I don't know what something sounds like when its being |
"calculated", but if its a mechanical noise, its got to be coming from
some moving parts. Likely sources are a bad CPU fan or Northbridge fan.
Since it seems to happen only when CPU is stressed, I'd suspect the
CPU fan. On the other hand, if its an electrical noise coming from some
component of the system, it could be much more difficult to fix. If you
can't tell the difference between electrical and mechanical noise, I
suggest you take it into the professionals.
-Dylan C |
|
| Back to top |
|
|
lxs
Guest
|
| Posted: Tue Sep 19, 2006 11:57 pm Post subject: Re: comp is making noise under graphics load |
|
|
Dylan C wrote:
| Quote: | lxs wrote:
Dylan C wrote:
lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon 9800pro.
The problem is when I try to run graphics program that uses opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a rattle
or buzz, you should be able to pinpoint the source by removing the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C
Thanks for the reply.
I don't have any speakers.
I've tried pin pointing to the location of the sound the noise is
coming from the area around cpu, its deminitely not PWS.
In general the noise sounds like something is being calculated but its
ubnormal.
Any help would be appresiated.
Thank you.
Well, I don't know what something sounds like when its being
"calculated", but if its a mechanical noise, its got to be coming from
some moving parts. Likely sources are a bad CPU fan or Northbridge fan.
Since it seems to happen only when CPU is stressed, I'd suspect the
CPU fan. On the other hand, if its an electrical noise coming from some
component of the system, it could be much more difficult to fix. If you
can't tell the difference between electrical and mechanical noise, I
suggest you take it into the professionals.
-Dylan C
|
Thanks again for your input.
Its not a mechanical noise since I've just replaced the cpu fan and PWS
but it seems like it might be electrical and its coming around the left
side of the cpu socket. I've checked for damaged circuit and found
nothing on either side of the board.
Under 50% stress the temperature of the CPU rises to 55c case temp is
at 26c and mobo tem is 30c.
Any sugestions?
Thank you. |
|
| Back to top |
|
|
Eric Parker
Guest
|
| Posted: Wed Sep 20, 2006 11:56 am Post subject: Re: comp is making noise under graphics load |
|
|
"lxs" <kesha199@yahoo.com> wrote in message
news:1158704529.611386.202740@m73g2000cwd.googlegroups.com...
| Quote: |
Dylan C wrote:
lxs wrote:
Dylan C wrote:
lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon
9800pro.
The problem is when I try to run graphics program that uses
opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the
model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a
rattle
or buzz, you should be able to pinpoint the source by removing
the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C
Thanks for the reply.
I don't have any speakers.
I've tried pin pointing to the location of the sound the noise
is
coming from the area around cpu, its deminitely not PWS.
In general the noise sounds like something is being calculated
but its
ubnormal.
Any help would be appresiated.
Thank you.
Well, I don't know what something sounds like when its being
"calculated", but if its a mechanical noise, its got to be coming
from
some moving parts. Likely sources are a bad CPU fan or
Northbridge fan.
Since it seems to happen only when CPU is stressed, I'd suspect
the
CPU fan. On the other hand, if its an electrical noise coming
from some
component of the system, it could be much more difficult to fix.
If you
can't tell the difference between electrical and mechanical noise,
I
suggest you take it into the professionals.
-Dylan C
Thanks again for your input.
Its not a mechanical noise since I've just replaced the cpu fan and
PWS
but it seems like it might be electrical and its coming around the
left
side of the cpu socket. I've checked for damaged circuit and found
nothing on either side of the board.
Under 50% stress the temperature of the CPU rises to 55c case temp
is
at 26c and mobo tem is 30c.
Any sugestions?
Thank you.
|
From your description I've got no idea what it sounds like.
Can you record normal & noisy and post it on a web site ?
Around the sides of CPU sockets are power converters.
CoCo's suggestion of touching these to dampen the sounds seems useful,
but as stated, beware the hot parts.
Eric
--
Remove the dross to contact me directly |
|
| Back to top |
|
|
lxs
Guest
|
| Posted: Wed Sep 20, 2006 1:13 pm Post subject: Re: comp is making noise under graphics load |
|
|
Eric Parker wrote:
| Quote: | "lxs" <kesha199@yahoo.com> wrote in message
news:1158704529.611386.202740@m73g2000cwd.googlegroups.com...
Dylan C wrote:
lxs wrote:
Dylan C wrote:
lxs wrote:
Hey guys I have asus p4p800se with p4 2.8E ghz and radeon
9800pro.
The problem is when I try to run graphics program that uses
opengl or
directx (ex. SolidWorks) it makes noises as soon as I move the
model
with my mouse..It makes noise even when i scroll down the page.
What could be the problem?
Thank you.
What does the noise sound like? If its a hardware noise like a
rattle
or buzz, you should be able to pinpoint the source by removing
the side
from your case and listening for the sound. Once the source is
determined, the problem can be better addressed.
-Dylan C
Thanks for the reply.
I don't have any speakers.
I've tried pin pointing to the location of the sound the noise
is
coming from the area around cpu, its deminitely not PWS.
In general the noise sounds like something is being calculated
but its
ubnormal.
Any help would be appresiated.
Thank you.
Well, I don't know what something sounds like when its being
"calculated", but if its a mechanical noise, its got to be coming
from
some moving parts. Likely sources are a bad CPU fan or
Northbridge fan.
Since it seems to happen only when CPU is stressed, I'd suspect
the
CPU fan. On the other hand, if its an electrical noise coming
from some
component of the system, it could be much more difficult to fix.
If you
can't tell the difference between electrical and mechanical noise,
I
suggest you take it into the professionals.
-Dylan C
Thanks again for your input.
Its not a mechanical noise since I've just replaced the cpu fan and
PWS
but it seems like it might be electrical and its coming around the
left
side of the cpu socket. I've checked for damaged circuit and found
nothing on either side of the board.
Under 50% stress the temperature of the CPU rises to 55c case temp
is
at 26c and mobo tem is 30c.
Any sugestions?
Thank you.
From your description I've got no idea what it sounds like.
Can you record normal & noisy and post it on a web site ?
Around the sides of CPU sockets are power converters.
CoCo's suggestion of touching these to dampen the sounds seems useful,
but as stated, beware the hot parts.
Eric
--
Remove the dross to contact me directly
|
Thank you for the reply.
I'm going to try and do that.
By the way is 55c on 50% load too much or not using "sisoft" P4 2.8E
socket 478.
Regards. |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups