|
|
|
|
| Author |
Message |
Eskay
Guest
|
 Posted: Fri Sep 08, 2006 3:22 pm Post subject: Pulse dialing does not work. |
 |
|
I am trying to get an Agere modem to access the internet.
The owner of this setup has pulse phone service and is reluctand to change
to tone.. (Costs more)
The settings in Phone and modem properties have been changed to pulse.
The system picks up and I can hear a dial tone,,It dials with the tone
sounds and when finished the dial tone is still there, with other words,It
is not dialing in.
I phoned the store where the computer was purchased and they suggest that
the modem is faulty.They also tell me that when the modem dials in pulse
you should hear the clicks from pulse dialing. I tried all this on my own
two computers but only hear tone dial sounds eventhough I changed the
settings to pulse. Has anyone any suggestions since I do not believe all
these tested modems are faulty?...Eskay |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Floyd L. Davidson
Guest
|
| Posted: Fri Sep 08, 2006 9:11 pm Post subject: Re: Pulse dialing does not work. |
|
|
Eskay <siebklaasNO@SPAMhotmail.com> wrote:
| Quote: | I am trying to get an Agere modem to access the internet.
The owner of this setup has pulse phone service and is reluctand to change
to tone.. (Costs more)
The settings in Phone and modem properties have been changed to pulse.
The system picks up and I can hear a dial tone,,It dials with the tone
sounds and when finished the dial tone is still there, with other words,It
is not dialing in.
I phoned the store where the computer was purchased and they suggest that
the modem is faulty.They also tell me that when the modem dials in pulse
you should hear the clicks from pulse dialing. I tried all this on my own
two computers but only hear tone dial sounds eventhough I changed the
settings to pulse. Has anyone any suggestions since I do not believe all
these tested modems are faulty?...Eskay
|
How did you do this "changed to pulse" of the settings?
Any place where it wants the dial command, instead of "ATDT" it
should have "ATDP". It may show that as only "DT" and "DP", and
automatically prepend the "AT".
If that doesn't make it work, when you list a number, put a "P"
in front of it. Hence, to dial 555-1212, give it "P5551212".
--
Floyd L. Davidson <http://www.apaflo.com/floyd_davidson>
Ukpeagvik (Barrow, Alaska) floyd@apaflo.com |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups