HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
[HELP] Firmware 3com NIC on 2466

 
Post new topic   Reply to topic    Index -> Tyan
Author Message
_Avatar_
Guest
PostPosted: Tue Sep 05, 2006 1:15 am    Post subject: [HELP] Firmware 3com NIC on 2466 Reply with quote
Hi,
my integrated NIC not recognized by Windows like a 3Com but like a unnknown
peripherals. is not a driver problem but hardware (at boot time the NIC is
not recognized always). i'm searching for a NIC firmware for Tyano Mobo.
Firmwares from 3com does not work!
Thanks.
Excuse me for my bad english wink
Nick
Back to top
BC
Guest
PostPosted: Tue Sep 05, 2006 7:47 am    Post subject: Re: [HELP] Firmware 3com NIC on 2466 Reply with quote
_Avatar_ wrote:
Quote:
Hi,
my integrated NIC not recognized by Windows like a 3Com but like a unnknown
peripherals. is not a driver problem but hardware (at boot time the NIC is
not recognized always). i'm searching for a NIC firmware for Tyano Mobo.
Firmwares from 3com does not work!
Thanks.
Excuse me for my bad english wink
Nick

Hi,

looks like the S2466 has a lot of PCI slots:

http://www.tyan.com/PRODUCTS/html/tigermpx.html

If the onboard NIC has failed for whatever reason, might be better to
just get a new 10/100M network card?

They are about $20 US, may be much less expensive on eBay, etc.

Hope this helps,

BC
Back to top
_Avatar_
Guest
PostPosted: Fri Sep 08, 2006 1:32 pm    Post subject: Re: [HELP] Firmware 3com NIC on 2466 Reply with quote
I buy a new NIC with chipset realtec for 5 Euros! work fine!
*** for the integrated NIC!
Thanx! bye!

"BC" <bc@bc.com> ha scritto nel messaggio
news:2R5Lg.15407$%j7.14646@newssvr29.news.prodigy.net...
Quote:
_Avatar_ wrote:
Hi,
my integrated NIC not recognized by Windows like a 3Com but like a
unnknown peripherals. is not a driver problem but hardware (at boot time
the NIC is not recognized always). i'm searching for a NIC firmware for
Tyano Mobo. Firmwares from 3com does not work!
Thanks.
Excuse me for my bad english wink
Nick

Hi,

looks like the S2466 has a lot of PCI slots:

http://www.tyan.com/PRODUCTS/html/tigermpx.html

If the onboard NIC has failed for whatever reason, might be better to just
get a new 10/100M network card?

They are about $20 US, may be much less expensive on eBay, etc.

Hope this helps,

BC
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Tyan All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects