HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
8 beep problem

 
Post new topic   Reply to topic    Index -> Elitegroup
Author Message
Guest






PostPosted: Fri Sep 01, 2006 2:52 pm    Post subject: 8 beep problem Reply with quote

Hi I have a L7S7A2 with an ATI Radeon 9600SE. My problem is every few
weeks I have trouble booting up my computer. I get 1 beep then 8 beeps.
According to what I read it is a Display Memory R/W Test failure
problem. If I continue pressing reset it keeps on doing it, but if I
shut down the power wait 30 seconds and power up again then everything
boots up great and everything works fine all day.
Since when it boots everything is OK could it be my video card or is my
motherboard starting to go?
TIA
Sal
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Eric Wolfe
Guest





PostPosted: Sat Sep 02, 2006 5:16 am    Post subject: Re: 8 beep problem Reply with quote

That board's old enough for the CMOS battery to have gone weak. I'd start
there for any intermittent that occurs after a period of inactivity. There
have been past complaints about your particular setup:

http://edseek.com/archives/2004/03/02/l7s7a2/

but I assume if it's been working fine for you so far, then you're running
into some other problem.

Other things that come to mind:

1) removing and reseating the video card - the contacts may have become
filmed over or corroded or the board might have "walked" its way out of the
socket slightly.

2) checking for bulging caps. Although I think the big problem with leaky
caps had been resolved by the time that board was built, there might have
still been some in the supply chain. Not likely, but anything that triggers
the magic beeps is HW or CMOS related, IMHO.

3) make note of your settings, clear CMOS, and reprogram it. The K7S5A's I
have are notorious for getting into some cyber-pyschoneurotic frazzle and
all have had to have their CMOS cleared at one time or another to get back
to working status.

Eric

<erables40@gmail.com> wrote in message
news:1157112633.253896.308330@e3g2000cwe.googlegroups.com...
Quote:
Hi I have a L7S7A2 with an ATI Radeon 9600SE. My problem is every few
weeks I have trouble booting up my computer. I get 1 beep then 8 beeps.
According to what I read it is a Display Memory R/W Test failure
problem. If I continue pressing reset it keeps on doing it, but if I
shut down the power wait 30 seconds and power up again then everything
boots up great and everything works fine all day.
Since when it boots everything is OK could it be my video card or is my
motherboard starting to go?
TIA
Sal
Back to top
Guest






PostPosted: Sat Sep 02, 2006 6:44 pm    Post subject: Re: 8 beep problem Reply with quote

Thanks for the reply I will try your suggestions. The last two days
it's doing fine again, so I should be good for a month or two, until it
starts over again for a few days. Within a few months i might be
upgrading to socket 939 with an amd 64.
Thanks

Eric Wolfe wrote:
Quote:
That board's old enough for the CMOS battery to have gone weak. I'd start
there for any intermittent that occurs after a period of inactivity. There
have been past complaints about your particular setup:

http://edseek.com/archives/2004/03/02/l7s7a2/

but I assume if it's been working fine for you so far, then you're running
into some other problem.

Other things that come to mind:

1) removing and reseating the video card - the contacts may have become
filmed over or corroded or the board might have "walked" its way out of the
socket slightly.

2) checking for bulging caps. Although I think the big problem with leaky
caps had been resolved by the time that board was built, there might have
still been some in the supply chain. Not likely, but anything that triggers
the magic beeps is HW or CMOS related, IMHO.

3) make note of your settings, clear CMOS, and reprogram it. The K7S5A's I
have are notorious for getting into some cyber-pyschoneurotic frazzle and
all have had to have their CMOS cleared at one time or another to get back
to working status.

Eric

erables40@gmail.com> wrote in message
news:1157112633.253896.308330@e3g2000cwe.googlegroups.com...
Hi I have a L7S7A2 with an ATI Radeon 9600SE. My problem is every few
weeks I have trouble booting up my computer. I get 1 beep then 8 beeps.
According to what I read it is a Display Memory R/W Test failure
problem. If I continue pressing reset it keeps on doing it, but if I
shut down the power wait 30 seconds and power up again then everything
boots up great and everything works fine all day.
Since when it boots everything is OK could it be my video card or is my
motherboard starting to go?
TIA
Sal
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Elitegroup All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects