HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
K75SA Rev 3 Upgrade options needed

 
Post new topic   Reply to topic    Index -> Elitegroup
Author Message
Home Theatre Guy
Guest





PostPosted: Thu Jun 08, 2006 3:31 pm    Post subject: K75SA Rev 3 Upgrade options needed Reply with quote

Its an ECS board but asume its elite as well ??


Anyway i have a freind who has the board. And he is in desperate need
of an upgrade.

Hes got a think a XP 2700 cpu on it or i have been told. 333mhz FSB
that has right.

Does the K75SA have a 133 fsb. Or is that just the early revisions.
Does revison 3 have 333. He said he bought the cpu for the board so
iam alittle confused why he got a 333 fbs chip as it would be alittle
unused ?

Also he wants to upgrade to a Nvidia 6600 videocard AGP. Iam not sure
if the board even has AGP well alteast revision 3.

Also iam not sure what voltage the agp port is if it has it is. From
what i read 1.5 volt sis for the old cards and 3.3 is for the new
cards.

If he can fit a 6600 on that board woudl be nice to know.

Thanks for any help.


Bye.
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
sdlomi2
Guest





PostPosted: Fri Dec 01, 2006 12:42 pm    Post subject: Re: K75SA Rev 3 Upgrade options needed Reply with quote

<Home Theatre Guy> wrote in message
news:o2dg821pu0qncmb5gjuu4v3j4rk9trfm4u@4ax.com...
Quote:

Its an ECS board but asume its elite as well ??


Anyway i have a freind who has the board. And he is in desperate need
of an upgrade.

Hes got a think a XP 2700 cpu on it or i have been told. 333mhz FSB
that has right.

Does the K75SA have a 133 fsb. Or is that just the early revisions.
Does revison 3 have 333. He said he bought the cpu for the board so
iam alittle confused why he got a 333 fbs chip as it would be alittle
unused ?

Also he wants to upgrade to a Nvidia 6600 videocard AGP. Iam not sure
if the board even has AGP well alteast revision 3.

Also iam not sure what voltage the agp port is if it has it is. From
what i read 1.5 volt sis for the old cards and 3.3 is for the new
cards.

If he can fit a 6600 on that board woudl be nice to know.

Thanks for any help.


Bye.

You asked several questions I can answer: Is ECS same as

Elite?.....Yes. "Does the K75SA (sic) have a 133 fsb. Or is that just the
early revisions. Does revison 3 have 333."
All the K7S5A's have both a 100 and a 133 fsb, but they are BAD about
'losing their cmos settings' when they are set to 133, as they for some
unknown reason fall back to 100 fsb. No revision of that mobo has a fsb of
333.
HTH, & good luck, s
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Elitegroup All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects