HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
KN1 sli lite

 
Post new topic   Reply to topic    Index -> Elitegroup
Author Message
David Hester
Guest





PostPosted: Mon Apr 24, 2006 8:33 pm    Post subject: KN1 sli lite Reply with quote

Is there a known problem when using pide and sata hard disks in a system.

I had a problem in that windows xp is installed on drive c (piade) and data
resides on drive d (sata). With sata connected the computer would take three
or four attempts to boot (windows would load then restart once the desktop
had appeared), and would also restart every 30 minutes or so, if I was
lucky. I changed memory, power supplies, and chips, originally a 3700+ sna
diago core, then a x2 3800+ dual manchester core, same problem with both
chips. Out of desperation I disconected the sata draive and everything seems
fine!

Any help would be appreciated.
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
David Hester
Guest





PostPosted: Tue Apr 25, 2006 10:32 am    Post subject: Re: KN1 sli lite Reply with quote

David Hester wrote:
Quote:
Is there a known problem when using pide and sata hard disks in a system.

I had a problem in that windows xp is installed on drive c (piade) and data
resides on drive d (sata). With sata connected the computer would take three
or four attempts to boot (windows would load then restart once the desktop
had appeared), and would also restart every 30 minutes or so, if I was
lucky. I changed memory, power supplies, and chips, originally a 3700+ sna
diago core, then a x2 3800+ dual manchester core, same problem with both
chips. Out of desperation I disconected the sata draive and everything seems
fine!

Any help would be appreciated.



unfortunatley conflict between sata and pide not the problem, back to

the drawing board!
Back to top
David Hester
Guest





PostPosted: Tue Apr 25, 2006 7:33 pm    Post subject: Re: KN1 sli lite Reply with quote

After much eresearch it would apper to be nVidia Network Access Manager
being the problem.

This problem also exists on the previous mb I waas using ASUS A8N SLI if any
of you are interested, which from the lack of posts I don't think anybody is
out there.

"David Hester" <dhester@btinternet.com> wrote in message
news:124rrce52b89234@news.supernews.com...
Quote:
David Hester wrote:
Is there a known problem when using pide and sata hard disks in a system.

I had a problem in that windows xp is installed on drive c (piade) and
data resides on drive d (sata). With sata connected the computer would
take three or four attempts to boot (windows would load then restart once
the desktop had appeared), and would also restart every 30 minutes or so,
if I was lucky. I changed memory, power supplies, and chips, originally a
3700+ sna diago core, then a x2 3800+ dual manchester core, same problem
with both chips. Out of desperation I disconected the sata draive and
everything seems fine!

Any help would be appreciated.



unfortunatley conflict between sata and pide not the problem, back to the
drawing board!
Back to top
Rennie
Guest





PostPosted: Tue May 02, 2006 6:33 pm    Post subject: Re: KN1 sli lite Reply with quote

Hi,
I just ordered the KN1 Extreme without SLI, because it´s of no use for
me. Still waiting for it.
I also heard that there is a lot of trouble regarding the network
manager i.e. active armor feature.
Allthough I am looking forward to receiving this board!
R
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Elitegroup All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects