|
|
|
|
| Author |
Message |
Some One
Guest
|
 Posted: Thu Dec 11, 2003 7:59 pm Post subject: MEW-AM motherboard usb pinout |
 |
|
I have a motherboard from an HP XL-761. The board has MEW-AM stenciled in
big letters between two of the PCI slots so I believe this is an Asus MEW-
AM board. The board matches the one shown in the Asus manual for the most
part, the floppy and IDE headers are positioned differently. There are
also four pins sticking up from the board labeled USB V1. In the original
case these were attached to the front panel USB port. I have moved the
motherboard to an Antec Plusview 1000 AMG case and I would like to use one
of the front panel USB ports on the Antec case. The problem I have is that
I can't find anything telling me which pin is what. The +5 volt pin would
be easy enough to find with a volt meter but how can I figure out the other
3 pins? I would appreciate any help. |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Gary Tait
Guest
|
| Posted: Thu Dec 11, 2003 8:45 pm Post subject: Re: MEW-AM motherboard usb pinout |
|
|
On Thu, 11 Dec 2003 07:59:49 -0600, Some One <someone@nowhere.com>
wrote:
| Quote: | I have a motherboard from an HP XL-761. The board has MEW-AM stenciled in
big letters between two of the PCI slots so I believe this is an Asus MEW-
AM board. The board matches the one shown in the Asus manual for the most
part, the floppy and IDE headers are positioned differently. There are
also four pins sticking up from the board labeled USB V1. In the original
case these were attached to the front panel USB port. I have moved the
motherboard to an Antec Plusview 1000 AMG case and I would like to use one
of the front panel USB ports on the Antec case. The problem I have is that
I can't find anything telling me which pin is what. The +5 volt pin would
be easy enough to find with a volt meter but how can I figure out the other
3 pins? I would appreciate any help.
|
Use the ohm setting on the meter between a known ground point and the
pins. The one showing near zero ohms will be ground. The other two
will be data, try them one way, if that doesn't work, try the other
way round. |
|
| Back to top |
|
|
Some One
Guest
|
| Posted: Fri Dec 12, 2003 4:14 am Post subject: Re: MEW-AM motherboard usb pinout |
|
|
Gary Tait <classicsat@yahoo.cominvalid> wrote in
news:4l0htv48kor7q3ibh5ckpeummu58mkc12b@4ax.com:
| Quote: | On Thu, 11 Dec 2003 07:59:49 -0600, Some One <someone@nowhere.com
wrote:
I have a motherboard from an HP XL-761. The board has MEW-AM
stenciled in big letters between two of the PCI slots so I believe
this is an Asus MEW- AM board. The board matches the one shown in the
Asus manual for the most part, the floppy and IDE headers are
positioned differently. There are also four pins sticking up from the
board labeled USB V1. In the original case these were attached to the
front panel USB port. I have moved the motherboard to an Antec
Plusview 1000 AMG case and I would like to use one of the front panel
USB ports on the Antec case. The problem I have is that I can't find
anything telling me which pin is what. The +5 volt pin would be easy
enough to find with a volt meter but how can I figure out the other
3 pins? I would appreciate any help.
Use the ohm setting on the meter between a known ground point and the
pins. The one showing near zero ohms will be ground. The other two
will be data, try them one way, if that doesn't work, try the other
way round.
|
Boy do I feel stupid now, I completely missed the obvious. Thanks Gary. |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups