|
|
|
|
| Author |
Message |
BobEvans3200
Guest
|
 Posted: Sun Apr 09, 2006 9:31 am Post subject: On power-up, fans just 'twitch' -- AK79G MAX |
 |
|
Hi -- I switched this MB into another case; in the old case, it and all
periphs worked fine. while I was doing the change-over, I added RAM. Now,
it won't work.
When I turn on the power supply switch, the red -protect-your-CPU LED comes
on, but, when I push my front-panel ON-switch, the fans don't start and
there is no boot -- the fans just 'twitch' once, and then stop. To re-try a
boot, I must unplug the power supply at the cord.
I've tried everything I can think of; even talked to AOpen tech supp, and
they replaced my board -- ; I still have the same symptoms.
I'm using an AMD 64. Thx for your help. -- Bob |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Stephen Howard
Guest
|
| Posted: Mon Apr 10, 2006 9:32 am Post subject: Re: On power-up, fans just 'twitch' -- AK79G MAX |
|
|
On Sun, 9 Apr 2006 02:13:40 -0700, "BobEvans3200"
<bobevans3200@hotmail.com> wrote:
| Quote: | Hi -- I switched this MB into another case; in the old case, it and all
periphs worked fine. while I was doing the change-over, I added RAM. Now,
it won't work.
When I turn on the power supply switch, the red -protect-your-CPU LED comes
on, but, when I push my front-panel ON-switch, the fans don't start and
there is no boot -- the fans just 'twitch' once, and then stop. To re-try a
boot, I must unplug the power supply at the cord.
I've tried everything I can think of; even talked to AOpen tech supp, and
they replaced my board -- ; I still have the same symptoms.
I'm using an AMD 64. Thx for your help. -- Bob
Have you tried it with just your old memory? |
I had a similar problem with my AX4SPE max II board - a dodgy stick of
memory stopped it dead at boot.
Regards,
--
Stephen Howard - Woodwind repairs & period restorations
www.shwoodwind.co.uk
Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk |
|
| Back to top |
|
|
BobEvans3200
Guest
|
| Posted: Sat Apr 15, 2006 2:32 pm Post subject: Sol'tn Found -- Re: On power-up, fans just 'twitch' -- AK79G |
|
|
I did not have a proper/complete/sung connection between my CPU and it's
heat sink/fan combo.
"BobEvans3200" <bobevans3200@hotmail.com> wrote in message
news:GuqdnZlDaPrVTaXZnZ2dnUVZ_tWdnZ2d@trueband.net...
| Quote: | Hi -- I switched this MB into another case; in the old case, it and all
periphs worked fine. while I was doing the change-over, I added RAM. Now,
it won't work.
When I turn on the power supply switch, the red -protect-your-CPU LED
comes on, but, when I push my front-panel ON-switch, the fans don't start
and there is no boot -- the fans just 'twitch' once, and then stop. To
re-try a boot, I must unplug the power supply at the cord.
I've tried everything I can think of; even talked to AOpen tech supp, and
they replaced my board -- ; I still have the same symptoms.
I'm using an AMD 64. Thx for your help. -- Bob
|
|
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups