|
|
| Author |
Message |
PCboy
Guest
|
 Posted: Wed Oct 15, 2003 1:10 pm Post subject: Micro ATX board with 300 Watts ATX Power Supply |
 |
|
I have a Micro ATX board (Acer V76M) that I want to fit in an ATX
case.
It works fine with a 145Watts Micro ATX case/PSU but do not power up
using the new ATX PSU.
I tried the same with a MS-6154 micro ATX board and the same happen.
The Micro ATX PSU that works do not carry the white wired -5Volts
while the new PSU does ! The new 300W PSU works fine with a standard
ATX MB !
Did anyone experienced such a problem ? It seems either the MB kill
sthe new PSU or the power consumption is too low (MB has video and
audio and a 466 Celeron II CPU).
Any idea ? |
|
| Back to top |
|
 |
|
|
Gary Tait
Guest
|
| Posted: Wed Oct 15, 2003 6:38 pm Post subject: Re: Micro ATX board with 300 Watts ATX Power Supply |
|
|
Whereas On 15 Oct 2003 01:10:41 -0700, jbfr@boursorama.com (PCboy)
scribbled:
, I thus relpy:
| Quote: | I have a Micro ATX board (Acer V76M) that I want to fit in an ATX
case.
It works fine with a 145Watts Micro ATX case/PSU but do not power up
using the new ATX PSU.
I tried the same with a MS-6154 micro ATX board and the same happen.
The Micro ATX PSU that works do not carry the white wired -5Volts
while the new PSU does ! The new 300W PSU works fine with a standard
ATX MB !
Did anyone experienced such a problem ? It seems either the MB kill
sthe new PSU or the power consumption is too low (MB has video and
audio and a 466 Celeron II CPU).
Any idea ?
|
Snip the white wire and see what happens. (you can splice it after
anyways).
--
Gary J. Tait . Email is at yahoo.com ; ID:classicsat |
|
| Back to top |
|
|
AJ
Guest
|
| Posted: Wed Oct 15, 2003 7:09 pm Post subject: Re: Micro ATX board with 300 Watts ATX Power Supply |
|
|
| Quote: | I have a Micro ATX board (Acer V76M) that I want to fit in an ATX
case.
It works fine with a 145Watts Micro ATX case/PSU but do not power up
using the new ATX PSU.
I tried the same with a MS-6154 micro ATX board and the same happen.
The Micro ATX PSU that works do not carry the white wired -5Volts
while the new PSU does ! The new 300W PSU works fine with a standard
ATX MB !
Did anyone experienced such a problem ? It seems either the MB kill
sthe new PSU or the power consumption is too low (MB has video and
audio and a 466 Celeron II CPU).
Any idea ?
|
I have 3 different brands of m-ATX boards and all work with a regular
ATX PSU. Biostar, Chaintech, and ASUS.
------------
When your PC gives a little they give a lot.
http://www.dslreports.com/forum/disco |
|
| Back to top |
|
|
|
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups