HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
activate SPDIF Out on 9cjs.

 
Post new topic   Reply to topic    Index -> Chaintech
Author Message
Guest
PostPosted: Mon Dec 26, 2005 12:31 pm    Post subject: activate SPDIF Out on 9cjs. Reply with quote
Hello,

I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.

I wonder how to do that. When I plug an optical wire, ther is no red
light on the other side of this wire...

If someone know how to make the 5.1 available, it would be cool.

PS : Sorry for my english
Back to top
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
Ginchy
Guest
PostPosted: Wed Dec 28, 2005 6:01 am    Post subject: Re: activate SPDIF Out on 9cjs. Reply with quote
try the bios?


<fredericmulot@gmail.com> wrote in message
news:1135597753.648823.249440@g14g2000cwa.googlegroups.com...
Quote:
Hello,

I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.

I wonder how to do that. When I plug an optical wire, ther is no red
light on the other side of this wire...

If someone know how to make the 5.1 available, it would be cool.

PS : Sorry for my english
Back to top
Guest
PostPosted: Thu Dec 29, 2005 10:31 am    Post subject: Re: activate SPDIF Out on 9cjs. Reply with quote
yep, I've tried, but nothing changed...
Back to top
uddarts
Guest
PostPosted: Fri Dec 30, 2005 6:32 am    Post subject: Re: activate SPDIF Out on 9cjs. Reply with quote
"" wrote:
Quote:
Hello,

I have a 9CJS motherboard, and I would like to activate tue
SPDIF Out.

I wonder how to do that. When I plug an optical wire, ther is
no red
light on the other side of this wire...

If someone know how to make the 5.1 available, it would be
cool.

PS : Sorry for my english

i don’t have a board with the onboard envy24 audio chip, so i can’t
give you the exact settings.

are you going to digital speakers or a receiver?


you’ll need to turn the digital on in the driver software. should be
in the speaker setup area. if you have then i would try uninstalling
and reinstalling the drivers with the multimedia card in the slot.

let me know how it goes.


ud

--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/activate-SPDIF-9cjs-ftopict67188.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=336112
Back to top
treefrog
Guest
PostPosted: Fri Dec 30, 2005 4:32 pm    Post subject: Re: activate SPDIF Out on 9cjs. Reply with quote
Open the Envy24 control panel - it probably shows in the lower
right-hand corner of your screen and tab over until you find SPDIF
config tab. I think it requires you to reboot after you change the
setting.

On Wed, 28 Dec 2005 06:01:04 +0000 (UTC), "Ginchy"
<avmaster@BBBBBbtinternet.com> wrote:

Quote:
try the bios?


fredericmulot@gmail.com> wrote in message
news:1135597753.648823.249440@g14g2000cwa.googlegroups.com...
Hello,

I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.

I wonder how to do that. When I plug an optical wire, ther is no red
light on the other side of this wire...

If someone know how to make the 5.1 available, it would be cool.

PS : Sorry for my english

Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Chaintech All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups


Powered by p|-|pBB

Featured Sites: DIY Projects