|
|
| Author |
Message |
Zilla
Guest
|
 Posted: Thu Dec 08, 2005 2:32 pm Post subject: 7NJL6 and MB monitor |
 |
|
Has anyone got the 7NJL6 working with the Motherboard
Monitor app? If so can you share your settings for the sensors?
--
- Zilla
Cary, NC USA
(Remove XSPAM) |
|
| Back to top |
|
 |
Fix your Windows Problems - FAST.
FREE Safe Scan Registry Check. Locate & Fix Errors in Minutes!
|
|
Guy
GURU
Joined: 08 Feb 2005
Posts: 171
|
| Posted: Fri Dec 09, 2005 7:40 pm Post subject: Re: 7NJL6 and MB monitor |
|
|
I installed MBM 5.3.7.0 and it does not have a config for the 7NJL6, so I tried a 7NJL3. It only reports the CPU speed, no temps. I think I will leave it installed and play with it some....
Meanwhile, I use SpeedFan 4.20, and it reports temps on the CPU, north bridge, and hard drives.
_________________
Guy |
|
| Back to top |
|
|
Zilla
Guest
|
| Posted: Sun Dec 11, 2005 11:33 pm Post subject: Re: 7NJL6 and MB monitor |
|
|
Please post your MB setup with the board on this
forum, or the MB site. I'll look at SpeedFan.
--
- Zilla
Cary, NC USA
(Remove XSPAM)
"Guy" <no@spam.invalid> wrote in message
news:OWlmf.301874$7k1.47138@fe12.news.easynews.com...
| Quote: | I installed MBM 5.3.7.0 and it does not have a config for the 7NJL6,
so I tried a 7NJL3. It only reports the CPU speed, no temps. I think
I will leave it installed and play with it some....
Meanwhile, I use SpeedFan 4.20, and it reports temps on the CPU, north
bridge, and hard drives.
|
|
|
| Back to top |
|
|
Guy
GURU
Joined: 08 Feb 2005
Posts: 171
|
| Posted: Mon Dec 12, 2005 3:35 pm Post subject: Re: 7NJL6 and MB monitor |
|
|
Z,
I cannot get the program to report any temps at all. It recognizes the chipset (LM90), but does not recognize the $4 address. So, no point in me posting that data.
I tried the 7NJL3 and 7NJS settings, neither worked. After exhaustively reading the help file, I get the impression that the developer needs to add somehting to cover each board or chipset.
_________________
Guy |
|
| Back to top |
|
|
Guy
Guest
|
| Posted: Mon Dec 12, 2005 5:33 pm Post subject: Re: 7NJL6 and MB monitor |
|
|
Z,
I cannot get the program to report any temps at all. It recognizes
the chipset (LM90), but does not recognize the $4 address. So, no
point in me posting that data.
I tried the 7NJL3 and 7NJS settings, neither worked. After
exhaustively reading the help file, I get the impression that the
developer needs to add somehting to cover each board or chipset. |
|
| Back to top |
|
|
|
|
Zilla
Guest
|
| Posted: Mon Dec 12, 2005 8:33 pm Post subject: Re: 7NJL6 and MB monitor |
|
|
Yes that was my experience.
Did you say you used SpeedFan in the meantime?
That app does NOT support CT 7NJL6 so how did
you make it work? (At least it's not on their list of
supported m/b's)
--
- Zilla
Cary, NC USA
(Remove XSPAM)
"Guy" <no@spam.invalid> wrote in message
news:qIhnf.46537$1q6.15125@fe02.news.easynews.com...
| Quote: | Z,
I cannot get the program to report any temps at all. It recognizes
the chipset (LM90), but does not recognize the $4 address. So, no
point in me posting that data.
I tried the 7NJL3 and 7NJS settings, neither worked. After
exhaustively reading the help file, I get the impression that the
developer needs to add somehting to cover each board or chipset.
|
|
|
| Back to top |
|
|
Guy
GURU
Joined: 08 Feb 2005
Posts: 171
|
| Posted: Tue Dec 13, 2005 1:42 am Post subject: Re: 7NJL6 and MB monitor |
|
|
Speedfan has no configuration utility; it apparently reads the NForce2 bus by default. It definitely takes some getting used to.
_________________
Guy |
|
| Back to top |
|
|
Guy
Guest
|
| Posted: Tue Dec 13, 2005 3:50 am Post subject: Re: 7NJL6 and MB monitor |
|
|
Speedfan has no configuration utility; it apparently reads the NForce2
bus by default. It definitely takes some getting used to. |
|
| Back to top |
|
|
|
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups