|
|
|
|
| Author |
Message |
khobar
Guest
|
 Posted: Fri Dec 02, 2005 4:32 am Post subject: NF4-A939 won't shutdown/reboot |
 |
|
I'm trying to figure out why my system won't shut down or reboot. System is
an ECS NF4-A939 with an Athlon X2 3800+, 1GB dual-channel DDR400, mix of
PATA drives and 1 SATA drive, ATi X550 PCIe, Win2KPro SP4.
Basically when I want to shut down or restart the system does its normal
"Shutting down Windows", etc. then I get dual black screens. I then have to
hit "reset" and it boots fine.
I've tried moving the RAM around and tried it in single channel mode. I've
defragged the drive and cleaned it up. No problems reported, etc. I get no
error messages.
System screens blank out after 15 mins of inactivity and come right back
when I touch the mouse.
I've tried installing Cool 'N Quiet but to no avail. System idle temp is
about 42C and maxload temp is 58C using stock fan with Arctic Silver paste.
I replaced the 70mm 3400RPM stock fan with an 80mm 5500RPM fan - makes a lot
more noise now and does keep it slightly cooler while I'm rendering.
Otherwise, no difference.
Power supply is a 580W with a 20-pin connector. I have a new ps on order
that might get here Saturday. I'm experiencing lockups that I've been trying
to trace down - they happen when running Studio 9.4 and Firefox with a
javascript window open/running. However, the shutdown/restart problem seems
to be a glitch with a driver or a file or something like that is my guess. I
tried the console repair/auto/fast and it didn't seem to do anything.
Any ideas?
Thanks in advance,
Paul Nixon
--
Tread the air above the din... |
|
| Back to top |
|
 |
|
|
khobar
Guest
|
| Posted: Sat Dec 03, 2005 10:33 pm Post subject: Re: NF4-A939 won't shutdown/reboot |
|
|
"khobar" <noone@nowhere.com> wrote in message
news:wuPjf.10060$Wu.6686@fed1read05...
| Quote: | I'm trying to figure out why my system won't shut down or reboot. System
is
an ECS NF4-A939 with an Athlon X2 3800+, 1GB dual-channel DDR400, mix of
PATA drives and 1 SATA drive, ATi X550 PCIe, Win2KPro SP4.
Basically when I want to shut down or restart the system does its normal
"Shutting down Windows", etc. then I get dual black screens. I then have
to
hit "reset" and it boots fine.
I've tried moving the RAM around and tried it in single channel mode. I've
defragged the drive and cleaned it up. No problems reported, etc. I get no
error messages.
System screens blank out after 15 mins of inactivity and come right back
when I touch the mouse.
I've tried installing Cool 'N Quiet but to no avail. System idle temp is
about 42C and maxload temp is 58C using stock fan with Arctic Silver
paste.
I replaced the 70mm 3400RPM stock fan with an 80mm 5500RPM fan - makes a
lot
more noise now and does keep it slightly cooler while I'm rendering.
Otherwise, no difference.
Power supply is a 580W with a 20-pin connector. I have a new ps on order
that might get here Saturday. I'm experiencing lockups that I've been
trying
to trace down - they happen when running Studio 9.4 and Firefox with a
javascript window open/running. However, the shutdown/restart problem
seems
to be a glitch with a driver or a file or something like that is my guess.
I
tried the console repair/auto/fast and it didn't seem to do anything.
Any ideas?
|
Problem solved re: shutdown/reboot. Must have been something in the CMOS
settings 'cause I clicked on load defaults or optimized or something and
it's working now. Doh...
Paul Nixon |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups