Posted: Sun Nov 13, 2005 12:32 am Post subject: SATA FIX!!
ECS tech finally got it through to me that there is a hardware issue --you
can't have a primary IDE and a SATA? so i disabled the primary channel and
it found the SATA drive "0' Master right away - no need to use the f6 option
during setup ect. thanks for the help
Posted: Tue Nov 15, 2005 2:31 am Post subject: Re: SATA FIX!!
"Pete Rynas" <r566b@comcast.net> wrote in message
news:RJ-dnWriv9EHH-veRVn-qw@comcast.com...
Quote:
ECS tech finally got it through to me that there is a hardware issue --you
can't have a primary IDE and a SATA? so i disabled the primary channel and
it found the SATA drive "0' Master right away - no need to use the f6 option
during setup ect. thanks for the help
Glad you got it straightened out, but you did say in your original post that it
also didn't work " by itself with primsary and secondary IDE channels disabled
and SATA only". Hmmm.
Posted: Sat Nov 19, 2005 5:31 am Post subject: Re: SATA FIX!!
yes , that is a good question!!! these ECS boards sometimes i swear are
haunted!!
"Buffalo" <eric(nospam)@nada.com.invalid> wrote in message
news:r9SdnYMP98uz3-TenZ2dnUVZ_tudnZ2d@comcast.com...
Quote:
"Pete Rynas" <r566b@comcast.net> wrote in message
news:RJ-dnWriv9EHH-veRVn-qw@comcast.com...
ECS tech finally got it through to me that there is a hardware
issue --you
can't have a primary IDE and a SATA? so i disabled the primary channel
and
it found the SATA drive "0' Master right away - no need to use the f6
option
during setup ect. thanks for the help
Glad you got it straightened out, but you did say in your original post
that it
also didn't work " by itself with primsary and secondary IDE channels
disabled
and SATA only". Hmmm.
Posted: Sat Nov 19, 2005 5:31 am Post subject: Re: SATA FIX!!
but i quess that you physically need to undo the primary IDE cable???
thought i did it though , like i said they are haunted!!
"Buffalo" <eric(nospam)@nada.com.invalid> wrote in message
news:r9SdnYMP98uz3-TenZ2dnUVZ_tudnZ2d@comcast.com...
Quote:
"Pete Rynas" <r566b@comcast.net> wrote in message
news:RJ-dnWriv9EHH-veRVn-qw@comcast.com...
ECS tech finally got it through to me that there is a hardware
issue --you
can't have a primary IDE and a SATA? so i disabled the primary channel
and
it found the SATA drive "0' Master right away - no need to use the f6
option
during setup ect. thanks for the help
Glad you got it straightened out, but you did say in your original post
that it
also didn't work " by itself with primsary and secondary IDE channels
disabled
and SATA only". Hmmm.
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups