|
|
|
|
| Author |
Message |
CrazzyRepairs
Guest
|
 Posted: Wed Oct 26, 2005 6:31 pm Post subject: AK77 600GN RAID Boot Problem |
 |
|
When my AK77 600GN boots the SATA RAID BIOS appears and the following
appears with it
Scan devices, Please wait...
press <Tab> key into user window!
I have not got any SATA HDDs installed, I have tried everything to get pass
this screen, USB keyboard does nothing, (plan to try PS/2) tried different
IDE HDDs, different cables, CDROMS, RAM, PSU, to solve this but have got
nowhere, in the manual it says u can disable this but u can't! except with a
BIOS update which I can't as I can't load from floppy, CDROM, I have also
tried clearing the CMOS, didn't work. would taking the battery out help?
Anybody got anything else for me to try?
Any replys, thanks |
|
| Back to top |
|
 |
|
|
Anssi Saari
Guest
|
| Posted: Thu Oct 27, 2005 3:31 pm Post subject: Re: AK77 600GN RAID Boot Problem |
|
|
"CrazzyRepairs" <crazzyrepairs@ntlworld.com> writes:
| Quote: | I have not got any SATA HDDs installed, I have tried everything to get pass
this screen
|
At least on my MAX version of the board, it goes past that screen
automatically. Even without any drives connected.
| Quote: | USB keyboard does nothing, (plan to try PS/2)
|
I think there's a setting in the bios to enable USB keyboard support,
is that on? |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups