|
|
|
|
| Author |
Message |
Guest
|
 Posted: Sat Oct 08, 2005 8:35 pm Post subject: SY-KT880 boot problems |
 |
|
I have a problem where the only time my computer will boot is right after I
reset the BIOS. I was wondering if there is a utility that will allow me to
modify the BIOS settings to what I want and create a new BIOS to load so
that the defaults are the settings I need. Right now, my 2500+ procecessor
is running at 1.1GHz because if I go into the BIOS and change the BIOS, the
computer won't boot on reset (no beeps or anything). I think I'm going to
have to RMA the board, but I've got a new CPU coming to see if that's the
problem. I've trried replacing the power supply and I've disconnected just
about everything to see if any of that is the problem. The only two items
left are the Mobo and CPU. |
|
| Back to top |
|
 |
|
|
qendiil
Member
Joined: 16 Oct 2005
Posts: 1
Location: Indianapolis
|
| Posted: Sun Oct 16, 2005 6:21 am Post subject: Re: SY-KT880 boot problems |
|
|
not having any trouble booting, but...
just built a new system i intend to "2 box" with in the future.
problems i'm noticing is that i cannot change some of my BIOS settings. i change them only to discover they are back where they were before!?
it keeps reenabling onboard sound and lan. changing my agp settings. won't let me change the agp or cpu voltage. it insists on enabling a scsi card when there isn't one in the machine.
soyo has a bios update for this board. would/should that update fix these problems? anyone know anything about this bios update? |
|
| Back to top |
|
|
uddarts
Guest
|
| Posted: Fri Oct 28, 2005 6:32 pm Post subject: Re: Re: SY-KT880 boot problems |
|
|
"" wrote:
| Quote: | not having any trouble booting, but...
just built a new system i intend to "2 box" with in the
future.
problems i'm noticing is that i cannot change some of my BIOS
settings. i change them only to discover they are back where
they
were before!?
it keeps reenabling onboard sound and lan. changing my agp
settings.
won't let me change the agp or cpu voltage. it insists on
enabling a
scsi card when there isn't one in the machine.
soyo has a bios update for this board. would/should that
update fix
these problems? anyone know anything about this bios update?
|
i keep forgetting you guys are over here. use to be all the
conversations were about rebates. bad taste in everyone’s mouth, that
one.
i see no new bios and probably won’t be. there definitely is a bug in
the bios that makes life miserable at times. i have both the dragon v1
& v2, both on a closet shelf at the moment. i plan on bring the
version 2 on line in the next month or so. as many times as i fought
with that bios, i don’t remember the exact order of changes to keep it
from reverting certain settings to default.
so if your still having problems or want to go on another adventure,
post again.
ud
--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/SY-KT880-boot-problems-ftopict63316.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=321957 |
|
| Back to top |
|
|
Tony Heslington
Guest
|
| Posted: Wed Dec 07, 2005 1:33 am Post subject: Re: SY-KT880 boot problems |
|
|
I think I had similar problem to you. Turns out my aftermarket quiet CPU
fan was too slow. My PC boots & reboots fine now.
Tony.
<chris.guynn@gmail.com> wrote in message
news:XhV1f.5488$Zs3.567@newssvr25.news.prodigy.net...
| Quote: | I have a problem where the only time my computer will boot is right after I
reset the BIOS. I was wondering if there is a utility that will allow me
to modify the BIOS settings to what I want and create a new BIOS to load so
that the defaults are the settings I need. Right now, my 2500+ procecessor
is running at 1.1GHz because if I go into the BIOS and change the BIOS, the
computer won't boot on reset (no beeps or anything). I think I'm going to
have to RMA the board, but I've got a new CPU coming to see if that's the
problem. I've trried replacing the power supply and I've disconnected just
about everything to see if any of that is the problem. The only two items
left are the Mobo and CPU.
|
|
|
| Back to top |
|
|
MHz Tweaker
Guest
|
| Posted: Thu Dec 29, 2005 4:32 am Post subject: Re: SY-KT880 boot problems |
|
|
On Sat, 08 Oct 2005 19:41:43 GMT, <chris.guynn@gmail.com> wrote:
| Quote: | I have a problem where the only time my computer will boot is right after I
reset the BIOS. I was wondering if there is a utility that will allow me to
modify the BIOS settings to what I want and create a new BIOS to load so
that the defaults are the settings I need. Right now, my 2500+ procecessor
is running at 1.1GHz because if I go into the BIOS and change the BIOS, the
computer won't boot on reset (no beeps or anything). I think I'm going to
have to RMA the board, but I've got a new CPU coming to see if that's the
problem. I've trried replacing the power supply and I've disconnected just
about everything to see if any of that is the problem. The only two items
left are the Mobo and CPU.
|
Hey
I know this is a late follow up but maybe this will help some of the
others out there.
First of all: this is one quirky board!!!! I've noticed that sometime
when I make changes in the BIOS, some of the onboard periph's will get
turned off i.e. USB/SATA/Sound etc....
After much screaming/head scratching and keyboard throwing (I'm not
kidding). I figured it out. I turned off the ABR (Anti Burn Regulator)
by removing the jumper from the motherboard. Second is to go into the
BIOS by holding down the INS key and then powering the system up. It
should pause and give you the option for going into the BIOS. I bought
this board at my local Tiger Direct Outlet because 1. good price $60
and 2. lots of feature (drive connectors). I installed a Sempron 2500+
and a 512 x 2 pair of Kingston 3200 DDR in Dual channel mode.
Go to the PC Health menu in the BIOS and Disable FOC and ABR. This
will stop the system from shutting down after a few seconds if you
have a slow or incompatible CPU fan. I took me 4hrs to figure this one
out. Save your setting and reboot. It took many tries but have come to
the conclusion that previous knowledge of mobo BIOS''s did me little
good with this one. I would just change one or two things at a time
and reboot to see what happeded.
Another strange thing is sometimes after a BIOS save or a cold boot
the keyboard won't work coming into the BIOS so I just unplug it from
the unit and re-insert it. It seems to work. I've even seen the
keyboard lights stay on after the system shuts down.
I have also had to re-enagle things like USB/sound and the Gigabit
ethernet after BIOS tweaking.
I did mange to get my Sempron 2500+ from 1750MHz up to 2084MHz or
something like that. I set the PC3200 on Auto settings and SPD/Auto
detect as well. Then changed the FSB speed to Manual and bumped it up
to 198 using the + key. I increase CPU core to 1.7 and left the RAM
and AGP alone. Also set the Divider for PCI/AGP to /6 which gives
you 33/66 MHz at DDR400 Ram speed. My temps are showing 44c and
111F using Hmonitor during light use. I have not attempted to
overclock more yet due to the fact I'm using a cheap heatsing fan by
MassCool. Model 5F287B1L3GL if ya want to look it up on Newegg or
tiger direct. I feel this board can do more with better cooling like a
Zalman or Thermalright unit.
This board didn't come with a Firewire Port or extra USB 2.0 expansion
card type port. Anyone know who might sell these things?
OHHHH I almost forgot. To correctly identify you CPU go into the MPS
Configuration area of the BIOS and change the setting to Revision 1.4
and that should handle the CPU not be identified correctly.
Soyo could probably eliminate 99% of the issues with this board if
they would just turn off the FOC control and change MPS to 1.4 by
default.
I will admit I was ready to break the thing in half trying to install
it but it has turned out to be a very stable board so far. I've run it
almost a week overclocked with no lockups or freezes under XP SP2. I
don't play many games but do a lot of file and video compression that
peg's the CPU at 100% quite a bit.
I'll check this tread the rest of the week if anyone wants to reply.
thanks
later |
|
| Back to top |
|
|
|
|
uddarts
Guest
|
| Posted: Fri Dec 30, 2005 6:32 am Post subject: Re: Re: SY-KT880 boot problems |
|
|
"" wrote:
| Quote: | On Sat, 08 Oct 2005 19:41:43 GMT, <chris.guynn@gmail.com
wrote:
I have a problem where the only time my computer will boot is
right after I
reset the BIOS. I was wondering if there is a utility that
will allow me to
modify the BIOS settings to what I want and create a new BIOS
to load so
that the defaults are the settings I need. Right now, my
2500+ procecessor
is running at 1.1GHz because if I go into the BIOS and change
the BIOS, the
computer won't boot on reset (no beeps or anything). I think
I'm going to
have to RMA the board, but I've got a new CPU coming to see
if that's the
problem. I've trried replacing the power supply and I've
disconnected just
about everything to see if any of that is the problem. The
only two items
left are the Mobo and CPU.
Hey
I know this is a late follow up but maybe this will help some
of the
others out there.
First of all: this is one quirky board!!!! I've noticed that
sometime
when I make changes in the BIOS, some of the onboard periph's
will get
turned off i.e. USB/SATA/Sound etc....
After much screaming/head scratching and keyboard throwing
(I'm not
kidding). I figured it out. I turned off the ABR (Anti Burn
Regulator)
by removing the jumper from the motherboard. Second is to go
into the
BIOS by holding down the INS key and then powering the system
up. It
should pause and give you the option for going into the BIOS.
I bought
this board at my local Tiger Direct Outlet because 1. good
price $60
and 2. lots of feature (drive connectors). I installed a
Sempron 2500+
and a 512 x 2 pair of Kingston 3200 DDR in Dual channel mode.
Go to the PC Health menu in the BIOS and Disable FOC and ABR.
This
will stop the system from shutting down after a few seconds if
you
have a slow or incompatible CPU fan. I took me 4hrs to figure
this one
out. Save your setting and reboot. It took many tries but have
come to
the conclusion that previous knowledge of mobo BIOS''s did me
little
good with this one. I would just change one or two things at a
time
and reboot to see what happeded.
Another strange thing is sometimes after a BIOS save or a cold
boot
the keyboard won't work coming into the BIOS so I just unplug
it from
the unit and re-insert it. It seems to work. I've even seen
the
keyboard lights stay on after the system shuts down.
I have also had to re-enagle things like USB/sound and the
Gigabit
ethernet after BIOS tweaking.
I did mange to get my Sempron 2500+ from 1750MHz up to 2084MHz
or
something like that. I set the PC3200 on Auto settings and
SPD/Auto
detect as well. Then changed the FSB speed to Manual and
bumped it up
to 198 using the + key. I increase CPU core to 1.7 and left
the RAM
and AGP alone. Also set the Divider for PCI/AGP to /6 which
gives
you 33/66 MHz at DDR400 Ram speed. My temps are showing
44c and
111F using Hmonitor during light use. I have not attempted to
overclock more yet due to the fact I'm using a cheap heatsing
fan by
MassCool. Model 5F287B1L3GL if ya want to look it up on Newegg
or
tiger direct. I feel this board can do more with better
cooling like a
Zalman or Thermalright unit.
This board didn't come with a Firewire Port or extra USB 2.0
expansion
card type port. Anyone know who might sell these things?
OHHHH I almost forgot. To correctly identify you CPU go into
the MPS
Configuration area of the BIOS and change the setting to
Revision 1.4
and that should handle the CPU not be identified correctly.
Soyo could probably eliminate 99% of the issues with this
board if
they would just turn off the FOC control and change MPS to 1.4
by
default.
I will admit I was ready to break the thing in half trying to
install
it but it has turned out to be a very stable board so far.
I've run it
almost a week overclocked with no lockups or freezes under XP
SP2. I
don't play many games but do a lot of file and video
compression that
peg's the CPU at 100% quite a bit.
I'll check this tread the rest of the week if anyone wants to
reply.
thanks
later
|
MHz Tweaker,
congratulations on not letting the board get the better of you.
your best bet is to get a pci card or front panel to add more usb or
firewire ports. i have noticed that the soyo and msi firewire header
pins are different. i don’t know which is the standard. so be aware.
if you stay out of the performance/oc area, the suprise changes don’t
happen. if you oc, set them first.
i spent months figuring this part out. if anyone has problems with no
posts after multiple reboots when trying to oc while raising the vcore
it’s the bios. it kind of goes like this and it depends on the cpu
your using.
xp/bartons 1.65v max voltage setting 1.82v.
xp/mobiles 1.45v max voltage setting 1.80v.
xp/bartons(low voltage) 1.50v max voltage setting 1.72v.
using the above list, you should have no problems. if you need more
voltage to run stable, you have to pin mod the voltage.
tweaker, i’m curious on where the board starts to fail to post with
the sempron in it. you could add to our data base. 
i’ve got my 2600-m@2500/running t-1 timings.
http://home.earthlink.net/~ud01/web3/KT880V2.JPG
ud
--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/SY-KT880-boot-problems-ftopict63316.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=336862 |
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups