HowToFixComputers.com




Watched TopicsWatched Topics SearchSearch RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
9NPA+Ultra memory recommendations

 
Post new topic   Reply to topic    Index -> Epox
Author Message
Kevin
Guest





PostPosted: Sat Sep 24, 2005 12:32 pm    Post subject: 9NPA+Ultra memory recommendations Reply with quote

Hey all!

I purchased the 9npa+ultra board but, after a week and a half of looking
for good memory for it, I'm at a loss. Since the latest BIOS versions
support DDR500 for the rev. E Athlon 64s, I figured why not go with that
(1GB total for now, with possible upgrade later). However, I cannot
sort out all the choices, especially with regards to performance RAM
like the OCZ or Mushkin Redline that perform better at higher voltages.

What I am looking for is a good performing (not necessarily the best as
I'm not much of a gamer), stable RAM for the system. I figured I'd
utilize the dual channel capability by using a 2x512mb kit (any reason
not to???). I'll be running the board with a Venice core 3000+ and
Sapphire X800XL if it makes a difference (I know the chip does since the
memory controller is onboard...but mainly since it's a rev. E as stated
earlier).

I've tried doing my homework, but I keep getting mixed results. Please
someone set me straight!!!


Thanks all!

Kevin

P.S. Please take underscore out of the return address if you wish to
respond directly.
Back to top
Old Hippy
Guest





PostPosted: Sun Sep 25, 2005 1:33 pm    Post subject: Re: 9NPA+Ultra memory recommendations Reply with quote

Hello
I use Corsair XMS got it from newegg.
Decient price and never had a problem with that brand even when
overcolcking!!.
Old Hippy

"Kevin" <dressel1_@charter.net> wrote in message
news:VgbZe.6255$X6.3268@fe05.lga...
Quote:
Hey all!

I purchased the 9npa+ultra board but, after a week and a half of looking
for good memory for it, I'm at a loss. Since the latest BIOS versions
support DDR500 for the rev. E Athlon 64s, I figured why not go with that
(1GB total for now, with possible upgrade later). However, I cannot sort
out all the choices, especially with regards to performance RAM like the
OCZ or Mushkin Redline that perform better at higher voltages.

What I am looking for is a good performing (not necessarily the best as
I'm not much of a gamer), stable RAM for the system. I figured I'd
utilize the dual channel capability by using a 2x512mb kit (any reason not
to???). I'll be running the board with a Venice core 3000+ and Sapphire
X800XL if it makes a difference (I know the chip does since the memory
controller is onboard...but mainly since it's a rev. E as stated earlier).

I've tried doing my homework, but I keep getting mixed results. Please
someone set me straight!!!


Thanks all!

Kevin

P.S. Please take underscore out of the return address if you wish to
respond directly.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Epox All times are GMT
Page 1 of 1

 

 MemberlistMemberlist  UsergroupsUsergroups



Powered by p|-|pBB

Featured Sites: DIY Projects