HowToFixComputers.com

non+'d · Guest

identified by Win98se, driver installed smoothly.

Alex Zorrilla · Guest

Start with the most obvious question first. Is the telephone cable
connected to the modem correctly? The cable from the wall goes to LINE,
the cable to a telephone (if any) goes to PHONE.

If that is not the problem, try going to Control Panel --> Modems -->
Diagnostics. There should be a "Query Modem" button. It should do
something for a few seconds and then spit a bunch of data at you. Don't
worry too much about what the data says... if you get this data, then it
"should" be working. An error would say something like "COM port is
already in use".

non+'d wrote:
> identified by Win98se, driver installed smoothly.

farmuse · Guest

If it passes that, and you can plug a phone into the other jack
and hear a tone, then the modem is toast.

Alex Zorrilla wrote:

Roger Hunt · Guest

On Tue, 16 Aug 2005, farmuse typed this :

Kyle · Guest

Here's another shot in the dark, I have a modem that uses a sold state
switching device to go "off hook" and "on hook" (one of those cheapie
Agere chipset based $10 modems) and it has a distinct AGP problem when
going off hook, and I had to use "don't wait for dial tone" setting in
the modem properties/advanced setup with an init string of: X3

After applying this "fix", the modem actually connects quite fast, as
fast a connection as any other modem I've used with v90 and v92.

You'd get a lot more help if you provided more details, e.g., the
modem brand and chipset and driver version used.
--
Best regards,
Kyle
"non+'d" <fake@nota.net> wrote in message
news:ao7rf1haju7bgh1r914v8819iifseop390@4ax.com...
| identified by Win98se, driver installed smoothly.

non+'d · Guest

Already returned it for refund. Was U.S. Robotics Model: USR5699B.
Even called their tech support, he talked me through the basic checks.
Have previously used ISA type, am wondering if PCI is problem. Could a
BIOS setting effect this? Might have changed something, poking around.
If the matters, also use AGP graphics card and do know i can't use
slot 1 PCI.
I assume others are using PCI modems in this board uneventfully. If
so, which brand/model. I really would like to update to V.92 standard.
Also this 33.6, my backup, is sloooow.

thanks