Posted: Fri Aug 12, 2005 6:33 pm Post subject: Newbie Q - Sorry
Hi there!
I am using a Chaintech 7NJS Ultra EZ mobo. I have recently changed my case
and in the process of moving everything across I decided to lose one of my
CD Rom drives.
Now all I am trying to use is a phillips DVD RW drive.
I have changed the jumper setting on the drive to master and used the middle
socket on the IDE cable and plugged the power on.
The PC is not finding the drive........ are there any jumper settings on the
mobo that I need to change?
Posted: Sat Aug 13, 2005 1:33 am Post subject: Re: Newbie Q - Sorry
"" wrote:
Quote:
Hi there!
I am using a Chaintech 7NJS Ultra EZ mobo. I have recently
changed my case
and in the process of moving everything across I decided to
lose one of my
CD Rom drives.
Now all I am trying to use is a phillips DVD RW drive.
I have changed the jumper setting on the drive to master and
used the middle
socket on the IDE cable and plugged the power on.
The PC is not finding the drive........ are there any jumper
settings on the
mobo that I need to change?
Can anyone suggest any other possible problem?
Thanks
DanStanDaMan
newbie question, huh! it’s a good one.
go into the bios/integrated peripherals/ide functions/ are set to auto
detect. try swapping the hard drive and rom cables. try jumpering the
rom drive to cable select(cs). find the cdrom again.
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups