Posted: Fri Aug 05, 2005 2:32 pm Post subject: Mainboard EP-4PEAD states error Code 05
Hello
I have a computer with the board Epox EP-4PEAD REV 1.0
After powering on it makes an alternating low and high beep. The Monitor
stays dark and the computer does not boot.
The power switch on the back of the computer has to be turned on and off
for several times to make the computer start. The Onboard Post-Port LED
displays 05
The manual states that error Code 05 means "1. Blank out screen 2. Clear
CMOS error flag. "
Can you tell me which component fails? or what to do to solve the problem?
Thank you very much for your help
Posted: Sat Aug 06, 2005 6:33 pm Post subject: Re: Mainboard EP-4PEAD states error Code 05
Try another power supply. Are the capacitors on the motherboard bulging?
DaveL
"Michael Dirksen" <Heirichsen@web.de> wrote in message
news:42f370e7$0$17729$9b622d9e@news.freenet.de...
Quote:
Hello
I have a computer with the board Epox EP-4PEAD REV 1.0
After powering on it makes an alternating low and high beep. The Monitor
stays dark and the computer does not boot.
The power switch on the back of the computer has to be turned on and off
for several times to make the computer start. The Onboard Post-Port LED
displays 05
The manual states that error Code 05 means "1. Blank out screen 2. Clear
CMOS error flag. "
Can you tell me which component fails? or what to do to solve the problem?
Thank you very much for your help
Posted: Tue Aug 09, 2005 9:32 am Post subject: Re: Mainboard EP-4PEAD states error Code 05
Hello DaveL
Thanks!
You are right. The capacitors are wrotten and leak
MIchael
DaveL wrote:
Quote:
Try another power supply. Are the capacitors on the motherboard bulging?
DaveL
"Michael Dirksen" <Heirichsen@web.de> wrote in message
news:42f370e7$0$17729$9b622d9e@news.freenet.de...
Hello
I have a computer with the board Epox EP-4PEAD REV 1.0
After powering on it makes an alternating low and high beep. The
Monitor stays dark and the computer does not boot.
The power switch on the back of the computer has to be turned on and
off for several times to make the computer start. The Onboard
Post-Port LED displays 05
The manual states that error Code 05 means "1. Blank out screen 2.
Clear CMOS error flag. "
Can you tell me which component fails? or what to do to solve the
problem?
Thank you very much for your help
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups