|
|
|
|
| Author |
Message |
Doc Miller
Guest
|
 Posted: Sun Jul 03, 2005 12:34 am Post subject: Tiger MPX S2466N-4M - Beep code 1-2 |
 |
|
Hi All,
I have a dual Athlon Tiger mother board and I've been upgrading the CPU
cooling due to higher temps than I would like. I upgraded the CPU cooler
on the second CPU last night and now it won't boot and I get a beep code of
1-2.
I didn't change any hardware and today I re-checked the CPU and cooler to
make sure I didn't flex the CPU card when I seated the cooler. All looks
well.
Anybody know what the 1-2 salute means?
Cheers,
Doc |
|
| Back to top |
|
 |
|
|
Bruce Burden
Guest
|
| Posted: Sun Jul 03, 2005 6:15 am Post subject: Re: Tiger MPX S2466N-4M - Beep code 1-2 |
|
|
Doc Miller <mankypro@yahoo.com> wrote:
:
: Anybody know what the 1-2 salute means?
:
According to bioscentral.com/beepcodes/phoenixbeep.htm,
it means CPU failure. That is, 1 beep, pause, 2 beeps.
Or, it is possible that it is a motherboard problem. In
the respective case, replace the CPU or motherboard.
Bruce
--
------------------------------------------------------------------------
"I like bad!" Bruce Burden Austin, TX.
- Thuganlitha
The Power and the Prophet
Robert Don Hughes |
|
| Back to top |
|
|
Doc Miller
Guest
|
| Posted: Sun Jul 03, 2005 6:52 am Post subject: Re: Tiger MPX S2466N-4M - Beep code 1-2 |
|
|
On 3 Jul 2005 02:15:01 GMT, brucegb@realtime.net (Bruce Burden) appears to
have written:
| Quote: | Doc Miller <mankypro@yahoo.com> wrote:
:
: Anybody know what the 1-2 salute means?
:
According to bioscentral.com/beepcodes/phoenixbeep.htm,
it means CPU failure. That is, 1 beep, pause, 2 beeps.
Or, it is possible that it is a motherboard problem. In
the respective case, replace the CPU or motherboard.
Bruce
|
Ouch! Do they differentiate between long and short? This one is one long
and two shorts. CPU failure makes sense - I just hope it is something
cheaper :-(
Thanks for the link!
Cheers,
Doc |
|
| Back to top |
|
|
Bruce Burden
Guest
|
| Posted: Mon Jul 04, 2005 8:16 am Post subject: Re: Tiger MPX S2466N-4M - Beep code 1-2 |
|
|
Doc Miller <mankypro@yahoo.com> wrote:
:
: Ouch! Do they differentiate between long and short? This one is one long
: and two shorts. CPU failure makes sense - I just hope it is something
: cheaper :-(
:
Hmmm, I think I read the web page wrong. The CPU/MoBo
signal is actually 2 longs, 2 shorts. If I recall, Tyan
makes the single beeps longs, else they are multiple shorts.
The only thing listed for 1-2 is for a Dell, in that
you have a bootable controller w/out any bootable devices
attached.
Bruce
--
------------------------------------------------------------------------
"I like bad!" Bruce Burden Austin, TX.
- Thuganlitha
The Power and the Prophet
Robert Don Hughes |
|
| Back to top |
|
|
Paul Murphy
Guest
|
| Posted: Tue Jul 05, 2005 12:36 pm Post subject: Re: Tiger MPX S2466N-4M - Beep code 1-2 |
|
|
"Doc Miller" <mankypro@yahoo.com> wrote in message
news:elkec1t4ob9mag89k1hilu8k58fceu9b6e@4ax.com...
| Quote: | On 3 Jul 2005 02:15:01 GMT, brucegb@realtime.net (Bruce Burden) appears to
have written:
Doc Miller <mankypro@yahoo.com> wrote:
:
: Anybody know what the 1-2 salute means?
:
According to bioscentral.com/beepcodes/phoenixbeep.htm,
it means CPU failure. That is, 1 beep, pause, 2 beeps.
Or, it is possible that it is a motherboard problem. In
the respective case, replace the CPU or motherboard.
Bruce
Ouch! Do they differentiate between long and short? This one is one long
and two shorts. CPU failure makes sense - I just hope it is something
cheaper :-(
Thanks for the link!
Cheers,
Doc
|
I'm unsure of what the beep code means but if you try 1 CPU at a time in the
motherboard that should confirm if its a CPU issue (unless of course you
only currently have one CPU in your Dual CPU capable motherboard)..
Paul |
|
| Back to top |
|
|
|
|
default
Guest
|
| Posted: Fri Jul 08, 2005 7:36 am Post subject: Re: Tiger MPX S2466N-4M - Beep code 1-2 |
|
|
According to the Phoenix bios documentation, 1-2 is error 98h, "Search for
option ROMs, One long, two short beeps on checksum failure."
Perhaps check any add-in cards that they are well seated and ok. If so,
remove cards one at a time to find the culprit. Cards with ROMs are usually
disk controllers, scsi controllers, videocards etc.
"Doc Miller" <mankypro@yahoo.com> wrote in message
news:h4cec1957v0annmlq22uffcoj99aitq4gc@4ax.com...
| Quote: | Hi All,
I have a dual Athlon Tiger mother board and I've been upgrading the CPU
cooling due to higher temps than I would like. I upgraded the CPU cooler
on the second CPU last night and now it won't boot and I get a beep code
of
1-2.
I didn't change any hardware and today I re-checked the CPU and cooler to
make sure I didn't flex the CPU card when I seated the cooler. All looks
well.
Anybody know what the 1-2 salute means?
Cheers,
Doc |
|
|
| Back to top |
|
|
|
|
| |
Watched Topics
Search
Register
Log in to check your private messages
Profile
Log in
Memberlist
Usergroups